If I understand you correctly, you could probably do something like this:
Create an action.sedit page that looks something like this:
[form]
[box content][(sedit {?section})] [box]
[submit]
[command sedit {?section}]
[form]
The sedit function would pull in the text between the two anchors, and the
sedit command would replace that section with the new content. Both would
be pretty simply scripts to write.
Then you just create a link like [[{p}&action=sedit§ion=#begin#end)]
It's just one way to do it, but it would be pretty simple for what you
want. Let me know if you get stuck. All the best!
Cheers,
Dan
On Fri Dec 05 2014 at 8:49:51 AM Tiffany Grenier <[email protected]>
wrote:
> I almost works perfectly, appart from what I already mentioned. I already
> had downloaded it before it was removed, but it's good to have it in
> another place. Just in case.
> Thanks.
>
>
> Le vendredi 5 décembre 2014 15:18:06 UTC+1, Dan a écrit :
>>
>> If you need help setting up either webhooks, or toolmapping let me know.
>> I've also attached the old sedit script if it gives you some ideas. Haven't
>> tried it--might come close to working as it is. You could easily change the
>> markup that triggers the section marker from !! Header to [[#anchor]].
>>
>> Don't have time right now to revise this myself, but if you get stuck,
>> let me know. I can get to it early next week.
>>
>> Cheers,
>> Dan
>>
>> On Fri Dec 05 2014 at 7:38:20 AM Tiffany Grenier <[email protected]>
>> wrote:
>>
>>> Hi again,
>>>
>>> I totally get your points. About the complexity, I think that the part
>>> of code in these functions that is currently dealing with anchors could be
>>> externalized. Then I would simply have to use a webhooks for this. That's
>>> the way I will explore now :-)
>>> I also wanted to rewrite the sedit plugin later on with the use again of
>>> its own "read/write" functions... but in a way that they would now
>>> introduce start and end anchors. My main issue with the current way of
>>> dealing with anchors, which also would also mess up sedit in the way you
>>> would see it, is the following: let's simply suppose there is an anchor
>>> [[#a]] in the section I want... then I would be unable to edit the entirery
>>> of my section, since it would start at [[#section1]] and stop at [[#a]],
>>> which comes before the end of the section!
>>>
>>> Cheers,
>>> Tiffany
>>>
>>> Le jeudi 20 novembre 2014 08:18:14 UTC+1, Tiffany Grenier a écrit :
>>>
>>>> Hi,
>>>> As promised some time ago, I have been working on a refactoring of
>>>> sedit in order to extend it to editing anything between two given anchors,
>>>> and not only between two section titles.
>>>> If this were included into the core scripts, then the sedit plugin
>>>> would only be a matter of inserting fake anchors at the beginning and
>>>> ending of each section, thus even allowing to edit any level of sections
>>>> one could wish.
>>>>
>>>> There it goes (I modified source and loadpage as well as savepage in
>>>> order to be able to display as well as edit):
>>>>
>>>> function BOLTFsource($args) {
>>>> global $pageLink, $BOLTid, $BOLTcommands, $BOLTsession;
>>>> if (! is_array($args)) $args = BOLTargs($args);
>>>> if (isset($args['post']) && isset($_POST[$args['post']])) return
>>>> BOLTescape(htmlspecialchars($_POST[$args['post']]));
>>>> if (isset($args['cookie']) && isset($_COOKIE[$args['cookie']]))
>>>> return BOLTescape(htmlspecialchars($_COOKIE[$args['cookie']]));
>>>> if (isset($args['get']) && isset($_GET[$args['get']])) return
>>>> BOLTescape(htmlspecialchars($_GET[$args['get']]));
>>>> if (isset($BOLTcommands[$args['command']])) return
>>>> $BOLTcommands[$args['command']];
>>>> $page = BOLTinit($args[1], $args['page']);
>>>> if ($page == '') return;
>>>> if (strpos($page, ':') !== false) {
>>>> $data = substr($page, strpos($page, ':'));
>>>> $page = substr($page, 0, strpos($page, ':'));
>>>> }
>>>> if (strpos($page, '#') !== false) {
>>>> $anchors = substr($page, strpos($page, '#'));
>>>> $page = substr($page, 0, strpos($page, '#'));
>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>> $lastanchor = substr($anchors, strrpos($anchors, '#'));
>>>> $firstanchor = substr($anchors, 0, strpos($anchors,
>>>> $lastanchor));
>>>> }
>>>> else {
>>>> $firstanchor = $anchors;
>>>> $lastanchor = '';
>>>> }
>>>> }
>>>> $page = BOLTpageshortcuts($page);
>>>> if (BOLTfilter($page, 'page') == '') return;
>>>> if (BOLTauth($page, $BOLTid, 'view') === false)
>>>> BOLTmessage("func_source_auth::$page", $args);
>>>> if ($data != '') {
>>>> if ($args['dir'] == 'stamps') $out =
>>>> BOLTvars("$page$firstanchor*$data");
>>>> else $out = BOLTvars("$page$firstanchor$data");
>>>> }
>>>> else {
>>>> if ($args['dir'] == 'stamps') $out = BOLTloadpage("$page$
>>>> firstanchor$lastanchor", $args['dir']);
>>>> else $out = BOLTloadpage("$page$firstanchor$lastanchor");
>>>> if (isset($args['lines'])) $out = BOLTgetlines($out,
>>>> $args['lines']);
>>>> }
>>>> $out = BOLTescape($out, false);
>>>> $out = BOLTcharEncode($out, $args['fmt']);
>>>> if (trim($out) == '') return $args['default'];
>>>> if ($args['escape'] !== 'false') $out = BOLTescape($out);
>>>> BOLTmessage("func_source::$page", $args);
>>>> return $out;
>>>> }
>>>>
>>>>
>>>> function BOLTloadpage($page, $dir='', $data='', $auth=false) {
>>>> ## LOADS PAGE AT $LOCATION (PAGES/FILE NAME), RETURNS CONTENTS. SET
>>>> $DATA TO 'data' TO RETRIEVE DATA WITH PAGE TEXT
>>>> if (function_exists('myBOLTloadpage')) return
>>>> myBOLTloadpage($page, $dir, $data, $auth);
>>>> if ($auth) {
>>>> global $BOLTid;
>>>> if (BOLTauth($page, $BOLTid, 'view') == false) return;
>>>> }
>>>> if ($page == '') return;
>>>> global $systemPath, $BOLTpageStore, $BOLTpageLibraries;
>>>> if (strpos($page, "#") !== false) {
>>>> $anchors = substr($page, strpos($page, '#'));
>>>> $page = substr($page, 0, strpos($page, "#"));
>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>> $lastanchor = BOLTurl2utf(substr($anchors,
>>>> strrpos($anchors, '#')));
>>>> $firstanchor = BOLTurl2utf(substr($anchors, 0,
>>>> strpos($anchors, $lastanchor)));
>>>> }
>>>> else {
>>>> $firstanchor = BOLTurl2utf($anchors);
>>>> $lastanchor = '#';
>>>> }
>>>> }
>>>> if ($dir == '' && $BOLTpageLibraries != '') { // checks for pages
>>>> outside of pages folder...
>>>> $index = substr($page, 0, strpos($page, '.'));
>>>> if (isset($BOLTpageLibraries[$index])) $dir =
>>>> $BOLTpageLibraries[$index];
>>>> }
>>>> if ($page != 'site.config' && $page != 'site.folders') {
>>>> $page = strtolower(BOLTutf2url($page));
>>>> $fpage = BOLTfolders($page);
>>>> }
>>>> else $fpage = $page;
>>>> if ($dir != '') {
>>>> $location = "$dir/$page";
>>>> if (file_exists($location) == false) return;
>>>> }
>>>> elseif (file_exists("pages/$fpage")) $location = "pages/$fpage";
>>>> elseif (file_exists("$systemPath/$page")) $location =
>>>> "$systemPath/$page";
>>>> else return;
>>>> if ($dir != '' || ($BOLTpageStore[$page] == '' &&
>>>> filesize($location) > 0)) {
>>>> $handle = fopen($location, "rb");
>>>> $contents = fread($handle, filesize($location));
>>>> fclose($handle);
>>>> $BOLTpageStore[$page] = str_replace(Array("\r\n", "\r"), "\n",
>>>> $contents);
>>>> }
>>>> $out = $BOLTpageStore[$page];
>>>> if ($data != 'data' && strpos($out, "\n~data~\n") !== false) {
>>>> $out = substr($out, 0, strpos($out, "\n~data~\n"));
>>>> $out = str_replace('~', '~', $out);
>>>> if (substr($page, 0, 5) != 'code.') $out = str_replace('<',
>>>> '<', $out);
>>>> }
>>>> if (isset($firstanchor)) {
>>>> if ($firstanchor == '#') {
>>>> if (strpos($out, '[['.$lastanchor) !== false) return
>>>> substr($out, 0, strpos($out, '[['.$lastanchor));
>>>> return $out;
>>>> }
>>>> elseif (preg_match('/\[\['.$firstanchor.'(\|.+)?\]\]/', $out,
>>>> $matches) == 1) {
>>>> $out = substr($out, strpos($out, $matches[0]) +
>>>> strlen($matches[0]));
>>>> if (strpos($out, '[['.$lastanchor) !== false) return
>>>> substr($out, 0, strpos($out, '[['.$lastanchor));
>>>> return $out;
>>>> }
>>>> return;
>>>> }
>>>> return $out;
>>>> }
>>>>
>>>>
>>>> function BOLTsavepage($page, $newcontent='', $newdata='', $loadtime='')
>>>> {
>>>> ## SYSTEM FUNCTION FOR SAVING PAGES, SECURES AGAINST DISALLOWED CODE
>>>> if (function_exists('myBOLTsavepage')) return
>>>> myBOLTsavepage($page, $newcontent, $newdata, $loadtime);
>>>> global $systemPath, $BOLTsession, $BOLTpageStore, $lastedit,
>>>> $pageLink, $BOLTindexPages;
>>>> if($loadtime == '') $loadtime = time();
>>>> if (strpos($page, '#') !== false) { // Note: can't find
>>>> [[#anchor|label]], just [[#anchor]]
>>>> $anchors = substr($page, strpos($page, '#'));
>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>> $lastanchor = '[[' . BOLTurl2utf(substr($anchors,
>>>> strrpos($anchors, '#'))) . ']]';
>>>> $firstanchor = '[[' . BOLTurl2utf(substr($anchors, 0,
>>>> strrpos($anchors, '#',strpos($anchors, '#')+1))) . ']]';
>>>> }
>>>> else {
>>>> $firstanchor = '[[' . BOLTurl2utf($anchors) . ']]';
>>>> $lastanchor = '[[#';
>>>> }
>>>> $page = BOLTutf2url(substr($page, 0, strpos($page, '#')));
>>>> }
>>>> $page = BOLTfilter(strtolower($page), 'page');
>>>> if ($page == '') BOLTabort('invalid_page_name');
>>>> $fpage = BOLTfolders($page);
>>>> if (file_exists("pages/$fpage")) {
>>>> $getpage = BOLTloadpage($page, '', 'data');
>>>> if (strpos($getpage, "\n~data~\n") !== false) {
>>>> $data = substr($getpage, strpos($getpage, "\n~data~\n"));
>>>> $oldcontent = substr($getpage, 0, strpos($getpage,
>>>> "\n~data~\n"));
>>>> }
>>>> else $oldcontent = $getpage;
>>>> }
>>>> if ($newdata != '') $data = $newdata; // newdata must already be
>>>> formatted...
>>>> if ($newcontent != '') {
>>>> $newcontent = BOLTsafetext($newcontent, $page);
>>>> if ($firstanchor != '') {
>>>> if (strpos($oldcontent, $firstanchor) === false) {
>>>> $content = $oldcontent . "\n$firstanchor\n" .
>>>> $newcontent;
>>>> if($lastanchor != '[[#') {
>>>> $content .= $lastanchor;
>>>> }
>>>> }
>>>> else {
>>>> $before = substr($oldcontent, 0, strpos($oldcontent,
>>>> $firstanchor));
>>>> $start = substr($oldcontent, strpos($oldcontent,
>>>> $firstanchor) + strlen($firstanchor));
>>>> if (strpos($start, $lastanchor) !== false) $after =
>>>> substr($start, strpos($start, $lastanchor));//$lastanchor already belongs
>>>> to $after
>>>> else {
>>>> $after = '';
>>>> if($lastanchor != '[[#') {
>>>> $after = $lastanchor.$after;
>>>> }
>>>> }
>>>> $content = $before . "\n" . $firstanchor . "\n" .
>>>> $newcontent . $after;
>>>> }
>>>> }
>>>> else $content = $newcontent;
>>>> $content = trim($content);
>>>> }
>>>> else $content = $oldcontent;
>>>> if ($content != $oldcontent) {
>>>> if (substr($content, -8) == "\n~data~\n") $content =
>>>> substr($content, 0, -8); // is this necessary?
>>>> if ($loadtime != '' && file_exists("pages/$fpage")) {
>>>> $lastmodified = filemtime("pages/$fpage") +
>>>> BOLTconfig('localTime', 0) * 3600;
>>>> if (is_int($loadtime) && $loadtime < $lastmodified) {
>>>> $out = "<box>\n" . 'Page $1 has been modified by
>>>> another user ('.strftime("%c",$lastmodified).') and their changes may
>>>> have been overwritten. Click [[$1&action=undo|+]] to view changed content.'
>>>> . "\n</box>\n\n";
>>>> $out = str_replace('$1', $page, $out);
>>>> $content = $out.$content;
>>>> }
>>>> }
>>>> }
>>>> if ($oldcontent == '' || $content != $oldcontent || $date !=
>>>> $newdata) {//allow creation of new page but avoid unecessary writing into
>>>> file
>>>> $mypage = fopen("pages/$fpage", "wb");
>>>> fwrite($mypage, $content.$data);
>>>> fclose($mypage);
>>>> }
>>>> $BOLTindexPages[] = $page;
>>>> $BOLTpageStore[$page] = $content.$data;
>>>> clearstatcache();
>>>> }
>>>>
>>>>
>>>> I think one can do a bit of generalization from this, but did not yet
>>>> figure out how to shorten these functions. Any help or thought wil be
>>>> highly appreciated.
>>>>
>>>> Cheers,
>>>> Tiffany
>>>>
>>>
>>>
>>> Le mercredi 26 novembre 2014 17:58:14 UTC+1, Dan a écrit :
>>>>
>>>> I've been looking at this for a while and decided not to implement
>>>> these in the core, for several reasons:
>>>>
>>>> 1) it seems to introduce a level of complexity I'm not comfortable with.
>>>>
>>>> 2) there are easy webhooks for the loadpage and save page functions,
>>>> and you can use toolmapping for the source function. In other words, you
>>>> should be able to get full plug and play functionality in your plugin
>>>> without requiring a change in the core.
>>>>
>>>> If you are not sure how to do either webhooks or toolmapping, let me
>>>> know.
>>>>
>>>> Also, if I recall correctly, the sedit plugin worked differently
>>>> anyway--with it's own read and write functions, so you didn't even have to
>>>> use anchors. I'd be happy to either tinker with it and get it back up to
>>>> speed, or send you the old scripts if you want to look at them.
>>>>
>>>> If I were to redo it now that BoltWire has the capability of editing
>>>> sections in the core I'd be inclined to try something like this:
>>>>
>>>> [[#section1]] Some Section
>>>> text
>>>> text
>>>>
>>>> Then write a markup rule which simply converts the first line into code
>>>> like the following:
>>>>
>>>> [[#section1]]
>>>> !! Some Section
>>>> [[{p}&action=sedit§ion=section1|Edit Section]]
>>>> text
>>>> text
>>>>
>>>> That would take just a handful of lines and be easy enough to deploy.
>>>> Lot's of ways to tweak it too based on what you want, just thinking out
>>>> loud.
>>>>
>>>> Let me know what you think? I'd like to see a good section edit plugin
>>>> back in the extensions area...
>>>>
>>>> Cheers,
>>>> Dan
>>>>
>>>>
>>>>
>>>>
>>>> On Thu Nov 20 2014 at 1:18:15 AM Tiffany Grenier <[email protected]>
>>>> wrote:
>>>>
>>> Hi,
>>>>> As promised some time ago, I have been working on a refactoring of
>>>>> sedit in order to extend it to editing anything between two given anchors,
>>>>> and not only between two section titles.
>>>>> If this were included into the core scripts, then the sedit plugin
>>>>> would only be a matter of inserting fake anchors at the beginning and
>>>>> ending of each section, thus even allowing to edit any level of sections
>>>>> one could wish.
>>>>>
>>>>> There it goes (I modified source and loadpage as well as savepage in
>>>>> order to be able to display as well as edit):
>>>>>
>>>>> function BOLTFsource($args) {
>>>>> global $pageLink, $BOLTid, $BOLTcommands, $BOLTsession;
>>>>> if (! is_array($args)) $args = BOLTargs($args);
>>>>> if (isset($args['post']) && isset($_POST[$args['post']])) return
>>>>> BOLTescape(htmlspecialchars($_POST[$args['post']]));
>>>>> if (isset($args['cookie']) && isset($_COOKIE[$args['cookie']]))
>>>>> return BOLTescape(htmlspecialchars($_COOKIE[$args['cookie']]));
>>>>> if (isset($args['get']) && isset($_GET[$args['get']])) return
>>>>> BOLTescape(htmlspecialchars($_GET[$args['get']]));
>>>>> if (isset($BOLTcommands[$args['command']])) return
>>>>> $BOLTcommands[$args['command']];
>>>>> $page = BOLTinit($args[1], $args['page']);
>>>>> if ($page == '') return;
>>>>> if (strpos($page, ':') !== false) {
>>>>> $data = substr($page, strpos($page, ':'));
>>>>> $page = substr($page, 0, strpos($page, ':'));
>>>>> }
>>>>> if (strpos($page, '#') !== false) {
>>>>> $anchors = substr($page, strpos($page, '#'));
>>>>> $page = substr($page, 0, strpos($page, '#'));
>>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>>> $lastanchor = substr($anchors, strrpos($anchors, '#'));
>>>>> $firstanchor = substr($anchors, 0, strpos($anchors,
>>>>> $lastanchor));
>>>>> }
>>>>> else {
>>>>> $firstanchor = $anchors;
>>>>> $lastanchor = '';
>>>>> }
>>>>> }
>>>>> $page = BOLTpageshortcuts($page);
>>>>> if (BOLTfilter($page, 'page') == '') return;
>>>>> if (BOLTauth($page, $BOLTid, 'view') === false)
>>>>> BOLTmessage("func_source_auth::$page", $args);
>>>>> if ($data != '') {
>>>>> if ($args['dir'] == 'stamps') $out =
>>>>> BOLTvars("$page$firstanchor*$data");
>>>>> else $out = BOLTvars("$page$firstanchor$data");
>>>>> }
>>>>> else {
>>>>> if ($args['dir'] == 'stamps') $out = BOLTloadpage("$page$
>>>>> firstanchor$lastanchor", $args['dir']);
>>>>> else $out = BOLTloadpage("$page$firstanchor$lastanchor");
>>>>> if (isset($args['lines'])) $out = BOLTgetlines($out,
>>>>> $args['lines']);
>>>>> }
>>>>> $out = BOLTescape($out, false);
>>>>> $out = BOLTcharEncode($out, $args['fmt']);
>>>>> if (trim($out) == '') return $args['default'];
>>>>> if ($args['escape'] !== 'false') $out = BOLTescape($out);
>>>>> BOLTmessage("func_source::$page", $args);
>>>>> return $out;
>>>>> }
>>>>>
>>>>>
>>>>> function BOLTloadpage($page, $dir='', $data='', $auth=false) {
>>>>> ## LOADS PAGE AT $LOCATION (PAGES/FILE NAME), RETURNS CONTENTS. SET
>>>>> $DATA TO 'data' TO RETRIEVE DATA WITH PAGE TEXT
>>>>> if (function_exists('myBOLTloadpage')) return
>>>>> myBOLTloadpage($page, $dir, $data, $auth);
>>>>> if ($auth) {
>>>>> global $BOLTid;
>>>>> if (BOLTauth($page, $BOLTid, 'view') == false) return;
>>>>> }
>>>>> if ($page == '') return;
>>>>> global $systemPath, $BOLTpageStore, $BOLTpageLibraries;
>>>>> if (strpos($page, "#") !== false) {
>>>>> $anchors = substr($page, strpos($page, '#'));
>>>>> $page = substr($page, 0, strpos($page, "#"));
>>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>>> $lastanchor = BOLTurl2utf(substr($anchors,
>>>>> strrpos($anchors, '#')));
>>>>> $firstanchor = BOLTurl2utf(substr($anchors, 0,
>>>>> strpos($anchors, $lastanchor)));
>>>>> }
>>>>> else {
>>>>> $firstanchor = BOLTurl2utf($anchors);
>>>>> $lastanchor = '#';
>>>>> }
>>>>> }
>>>>> if ($dir == '' && $BOLTpageLibraries != '') { // checks for pages
>>>>> outside of pages folder...
>>>>> $index = substr($page, 0, strpos($page, '.'));
>>>>> if (isset($BOLTpageLibraries[$index])) $dir =
>>>>> $BOLTpageLibraries[$index];
>>>>> }
>>>>> if ($page != 'site.config' && $page != 'site.folders') {
>>>>> $page = strtolower(BOLTutf2url($page));
>>>>> $fpage = BOLTfolders($page);
>>>>> }
>>>>> else $fpage = $page;
>>>>> if ($dir != '') {
>>>>> $location = "$dir/$page";
>>>>> if (file_exists($location) == false) return;
>>>>> }
>>>>> elseif (file_exists("pages/$fpage")) $location = "pages/$fpage";
>>>>> elseif (file_exists("$systemPath/$page")) $location =
>>>>> "$systemPath/$page";
>>>>> else return;
>>>>> if ($dir != '' || ($BOLTpageStore[$page] == '' &&
>>>>> filesize($location) > 0)) {
>>>>> $handle = fopen($location, "rb");
>>>>> $contents = fread($handle, filesize($location));
>>>>> fclose($handle);
>>>>> $BOLTpageStore[$page] = str_replace(Array("\r\n", "\r"), "\n",
>>>>> $contents);
>>>>> }
>>>>> $out = $BOLTpageStore[$page];
>>>>> if ($data != 'data' && strpos($out, "\n~data~\n") !== false) {
>>>>> $out = substr($out, 0, strpos($out, "\n~data~\n"));
>>>>> $out = str_replace('~', '~', $out);
>>>>> if (substr($page, 0, 5) != 'code.') $out = str_replace('<',
>>>>> '<', $out);
>>>>> }
>>>>> if (isset($firstanchor)) {
>>>>> if ($firstanchor == '#') {
>>>>> if (strpos($out, '[['.$lastanchor) !== false) return
>>>>> substr($out, 0, strpos($out, '[['.$lastanchor));
>>>>> return $out;
>>>>> }
>>>>> elseif (preg_match('/\[\['.$firstanchor.'(\|.+)?\]\]/', $out,
>>>>> $matches) == 1) {
>>>>> $out = substr($out, strpos($out, $matches[0]) +
>>>>> strlen($matches[0]));
>>>>> if (strpos($out, '[['.$lastanchor) !== false) return
>>>>> substr($out, 0, strpos($out, '[['.$lastanchor));
>>>>> return $out;
>>>>> }
>>>>> return;
>>>>> }
>>>>> return $out;
>>>>> }
>>>>>
>>>>>
>>>>> function BOLTsavepage($page, $newcontent='', $newdata='',
>>>>> $loadtime='') {
>>>>> ## SYSTEM FUNCTION FOR SAVING PAGES, SECURES AGAINST DISALLOWED CODE
>>>>> if (function_exists('myBOLTsavepage')) return
>>>>> myBOLTsavepage($page, $newcontent, $newdata, $loadtime);
>>>>> global $systemPath, $BOLTsession, $BOLTpageStore, $lastedit,
>>>>> $pageLink, $BOLTindexPages;
>>>>> if($loadtime == '') $loadtime = time();
>>>>> if (strpos($page, '#') !== false) { // Note: can't find
>>>>> [[#anchor|label]], just [[#anchor]]
>>>>> $anchors = substr($page, strpos($page, '#'));
>>>>> if (strrpos($anchors, '#',strpos($anchors, '#')+1) !== false) {
>>>>> $lastanchor = '[[' . BOLTurl2utf(substr($anchors,
>>>>> strrpos($anchors, '#'))) . ']]';
>>>>> $firstanchor = '[[' . BOLTurl2utf(substr($anchors, 0,
>>>>> strrpos($anchors, '#',strpos($anchors, '#')+1))) . ']]';
>>>>> }
>>>>> else {
>>>>> $firstanchor = '[[' . BOLTurl2utf($anchors) . ']]';
>>>>> $lastanchor = '[[#';
>>>>> }
>>>>> $page = BOLTutf2url(substr($page, 0, strpos($page, '#')));
>>>>> }
>>>>> $page = BOLTfilter(strtolower($page), 'page');
>>>>> if ($page == '') BOLTabort('invalid_page_name');
>>>>> $fpage = BOLTfolders($page);
>>>>> if (file_exists("pages/$fpage")) {
>>>>> $getpage = BOLTloadpage($page, '', 'data');
>>>>> if (strpos($getpage, "\n~data~\n") !== false) {
>>>>> $data = substr($getpage, strpos($getpage, "\n~data~\n"));
>>>>> $oldcontent = substr($getpage, 0, strpos($getpage,
>>>>> "\n~data~\n"));
>>>>> }
>>>>> else $oldcontent = $getpage;
>>>>> }
>>>>> if ($newdata != '') $data = $newdata; // newdata must already be
>>>>> formatted...
>>>>> if ($newcontent != '') {
>>>>> $newcontent = BOLTsafetext($newcontent, $page);
>>>>> if ($firstanchor != '') {
>>>>> if (strpos($oldcontent, $firstanchor) === false) {
>>>>> $content = $oldcontent . "\n$firstanchor\n" .
>>>>> $newcontent;
>>>>> if($lastanchor != '[[#') {
>>>>> $content .= $lastanchor;
>>>>> }
>>>>> }
>>>>> else {
>>>>> $before = substr($oldcontent, 0, strpos($oldcontent,
>>>>> $firstanchor));
>>>>> $start = substr($oldcontent, strpos($oldcontent,
>>>>> $firstanchor) + strlen($firstanchor));
>>>>> if (strpos($start, $lastanchor) !== false) $after =
>>>>> substr($start, strpos($start, $lastanchor));//$lastanchor already belongs
>>>>> to $after
>>>>> else {
>>>>> $after = '';
>>>>> if($lastanchor != '[[#') {
>>>>> $after = $lastanchor.$after;
>>>>> }
>>>>> }
>>>>> $content = $before . "\n" . $firstanchor . "\n" .
>>>>> $newcontent . $after;
>>>>> }
>>>>> }
>>>>> else $content = $newcontent;
>>>>> $content = trim($content);
>>>>> }
>>>>> else $content = $oldcontent;
>>>>> if ($content != $oldcontent) {
>>>>> if (substr($content, -8) == "\n~data~\n") $content =
>>>>> substr($content, 0, -8); // is this necessary?
>>>>> if ($loadtime != '' && file_exists("pages/$fpage")) {
>>>>> $lastmodified = filemtime("pages/$fpage") +
>>>>> BOLTconfig('localTime', 0) * 3600;
>>>>> if (is_int($loadtime) && $loadtime < $lastmodified) {
>>>>> $out = "<box>\n" . 'Page $1 has been modified by
>>>>> another user ('.strftime("%c",$lastmodified).') and their changes may
>>>>> have been overwritten. Click [[$1&action=undo|+]] to view changed
>>>>> content.'
>>>>> . "\n</box>\n\n";
>>>>> $out = str_replace('$1', $page, $out);
>>>>> $content = $out.$content;
>>>>> }
>>>>> }
>>>>> }
>>>>> if ($oldcontent == '' || $content != $oldcontent || $date !=
>>>>> $newdata) {//allow creation of new page but avoid unecessary writing into
>>>>> file
>>>>> $mypage = fopen("pages/$fpage", "wb");
>>>>> fwrite($mypage, $content.$data);
>>>>> fclose($mypage);
>>>>> }
>>>>> $BOLTindexPages[] = $page;
>>>>> $BOLTpageStore[$page] = $content.$data;
>>>>> clearstatcache();
>>>>> }
>>>>>
>>>>>
>>>>> I think one can do a bit of generalization from this, but did not yet
>>>>> figure out how to shorten these functions. Any help or thought wil be
>>>>> highly appreciated.
>>>>>
>>>>> Cheers,
>>>>> Tiffany
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "BoltWire" group.
>>>>>
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> To post to this group, send email to [email protected].
>>>>
>>>>
>>>>> Visit this group at http://groups.google.com/group/boltwire.
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "BoltWire" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To post to this group, send email to [email protected].
>>> Visit this group at http://groups.google.com/group/boltwire.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "BoltWire" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/boltwire.
> For more options, visit https://groups.google.com/d/optout.
>
--
You received this message because you are subscribed to the Google Groups
"BoltWire" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/boltwire.
For more options, visit https://groups.google.com/d/optout.
