rodry wrote: > I everyone, after a long service (from 2008), my boom display has gone. > I try to repair reading JoeMuc2009 guide ( 3 diode) but the display is > dead: the problem now is the connection to wifi after a modem change. > *Is there a method to setup boom wifi via cable?* > IS there anybody that can send me menu structure of the boom (I try to > setup wifi without see anything...yes very hard ;) ) > > Thank's > Marco
I think you can configure the Boom wifi using Net::UDAP - a quick google search for that should help, I think all the articles will be about the receiver but don't let that put you off. Only other quick and easy fix I can think of, if you have the old router wifi details still stored in the Boom, then just change the wifi SSID and passcode on the new router/modem to match, or if it allows add a new SSID and passcode to match. If neither of those help you, lookout for a cheap Boom on eBay (I've picked them up for less then €30 before) you can then either use the "new" one as a template to step through and configure your one with a failed screen or just set up the new one and run with that or depending on condition make up one good Boom from the two. Kev ------------------------------------------------------------------------ KeBul's Profile: http://forums.slimdevices.com/member.php?userid=32883 View this thread: http://forums.slimdevices.com/showthread.php?t=114291 _______________________________________________ Boom mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/boom
