Hello Alan,
When you boot with Uefi.
1. first get into EBL and run devicepaths command.*
VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage.
* matches with the displayed in the list.
2. If it doesnt match, please change it to the corresponding name displayed.
It has to boot after this change.
regards
Girish K S
2011/8/12 Alan Chuang <alan.chu...@arm.com>
> Hi all:****
>
> I just started to play around with ARM UEFI stuff and has issue
> booting into Linux when trying to test the EDK2 software on Qemu. This seems
> like the right place to ask. I followed the instruction in (
> http://edk2.svn.sourceforge.net/viewvc/edk2/trunk/edk2/BeagleBoardPkg/readme.txt?revision=11997)
> including downloading the specific version of binaries / tools. When trying
> to run UEFI (both in NOR flash method as well as SD card method), UEFI
> started successfully. However, I kept on getting “Did not find Linux kernel”
> error when trying to boot Linux. From EBL, I can see the zImage file is
> present (cd fs1:; dir). The zImage file is basically
> vmlinuz-2.6.35-1008-linaro-omap from the hwpack. I even tried to extract
> zImage from uImage, but the result is still the same.****
>
> ** **
>
> I am wondering if anyone has run into the same issue and can give
> me a hint on what else to try.****
>
> ** **
>
> Thanks,****
>
> ** **
>
> Alan Chuang****
>
> ** **
>
> ---------------- Console Log -------------------****
>
> The default boot selection will start in 1 seconds****
>
> CMD0 response: 0****
>
> MmcStatus: 18000****
>
> CMD5 fails. Not an SDIO card.****
>
> CMD8 success. CMD8 response: 1CE****
>
> Card is SD2.0****
>
> CMD55 success. CMD55 response: 120****
>
> SD card detected. ACMD41 OCR: C0FFFF00****
>
> High capacity card.****
>
> CMD2 response: EF006219 1DEADBE 454D5521 AA585951****
>
> CMD3 response: RCA 4567****
>
> CMD9 response: A400000 FFF7F80 5B590000 400E0032****
>
> Card type: 4, BlockSize: 200, NumBlocks: 400000****
>
> MaxDataTransferRate: 0x32, Frequency: 25000 KHz, ClockFrequencySelect: 4**
> **
>
> SD Memory Card set to 4-bit mode****
>
> SD Card Media Change on Handle 0x8792E290****
>
> SD Card ReinstallProtocolInterface ()****
>
> ERROR: Did not find Linux kernel.****
>
> [1] Linux from SD****
>
> -
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
> ****
>
> - LoaderType: 1****
>
> - Arguments: ****
>
> [2] EBL****
>
> [3] Boot Manager****
>
> Start: 3****
>
> [1] Add Boot Device Entry****
>
> [2] Update Boot Device Entry****
>
> [3] Remove Boot Device Entry****
>
> [4] Return to main menu****
>
> Choice: 2****
>
> [1] Linux from SD****
>
> -
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
> ****
>
> - Arguments: ****
>
> Update entry: 1****
>
> File path of the EFI Application or the kernel: zImage****
>
> Has FDT support? [y/n] n****
>
> Arguments to pass to the binary: ****
>
> Description for this new Entry: Linux from SD****
>
> [1] Add Boot Device Entry****
>
> [2] Update Boot Device Entry****
>
> [3] Remove Boot Device Entry****
>
> [4] Return to main menu****
>
> Choice: 4****
>
> [1] Linux from SD****
>
> -
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
> ****
>
> - LoaderType: 1****
>
> - Arguments: ****
>
> [2] EBL****
>
> [3] Boot Manager****
>
> Start: 2****
>
> EhcCreateUsb2Hc: capability length 0****
>
> EhcDriverBindingStart: failed to create USB2_HC****
>
> add-symbol-file
> /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll
> 0x85BCD240****
>
> Embedded Boot Loader (EBL) prototype. Built at 09:56:17 on Aug 12 2011****
>
> THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN 'AS IS' BASIS,****
>
> WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
> IMPLIED.****
>
> Please send feedback to edk2-de...@lists.sourceforge.net****
>
> BeagleEdk2 >device****
>
> Firmware Volume Devices:****
>
> fv0: 0x80008000 - 0x80087FFF : 0x00080000****
>
> fv1: 0x87C4A000 - 0x87E0751F : 0x001BD520****
>
> File System Devices:****
>
> fs0: SemihostFs:****
>
> fs1: boot:****
>
> Block IO Devices:****
>
> blk0: Size = 0x10000000****
>
> blk1: Removable Size = 0x80000000****
>
> blk2: fs1: Removable Partition Size = 0x33F8000****
>
> blk3: Removable Partition Size = 0x7CC00000****
>
> BeagleEdk2 >devicepaths****
>
> EhcCreateUsb2Hc: capability length 0****
>
> EhcDriverBindingStart: failed to create USB2_HC****
>
> [0x87A00790] MemoryMapped(0xB,0x80008000,0x80087FFF)****
>
> [0x87A00490] MemoryMapped(0xB,0x87C4A000,0x87E0751F)****
>
> [0x87975B10] VenHw(6696936D-3637-467C-87CB-14EA8248948C)/Uart(115200,8,N,1)
> ****
>
> [0x8796B910] VenHw(4D00EF14-C4E0-426B-81B7-30A00A14AAD6)****
>
> [0x8792E290] VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)****
>
> [0x8792D390] PciRoot(0x0)/Pci(0x0,0x0)****
>
> [0x87918890] VenHw(C5B9C74A-6D72-4719-99AB-C59F199091EB)****
>
> [0x8790A890]
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)
> ****
>
> [0x8790A590]
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(2,MBR,0x00000000,0x1A000,0x3E6000)
> ****
>
> BeagleEdk2 >exit****
>
> remove-symbol-file
> /home/alanc/UEFI/src2/edk2/Build/BeagleBoard/DEBUG_ARMGCC/ARM/EmbeddedPkg/Ebl/Ebl/DEBUG/Ebl.dll
> 0x85BCD240****
>
> [1] Linux from SD****
>
> -
> VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(1,MBR,0x00000000,0x3F,0x19FC0)/zImage
> ****
>
> - LoaderType: 1****
>
> - Arguments: ****
>
> [2] EBL****
>
> [3] Boot Manager****
>
> Start:****
>
> -- IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy the
> information in any medium. Thank you.
>
> _______________________________________________
> boot-architecture mailing list
> boot-architecture@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/boot-architecture
>
>
_______________________________________________
boot-architecture mailing list
boot-architecture@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/boot-architecture
