On 05/23/2018 12:14 AM, Udit Kumar wrote:
This patch adds a appendix for EBBR compliance test.
Signed-off-by: Udit Kumar <[email protected]>
---
source/ebbr.rst | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/source/ebbr.rst b/source/ebbr.rst
index 40f03f1..880f126 100644
--- a/source/ebbr.rst
+++ b/source/ebbr.rst
@@ -557,6 +557,22 @@ Service UEFI ยง
EFI_ISCSI_INITIATOR_NAME_PROTOCOL 16.2
========================================== ======
+*******************************************
+APPENDIX E - EBBR Compliance Tests
+*******************************************
+
+UEFI Self Certification Tests (SCT) test the UEFI implementation.
+EBBR is leveraging from UEFI, UEFI SCT test suites check for compliance
+against the EBBR specification.
+To build UEFI SCT, please refer https://github.com/UEFI/UEFI-SCT
Please reword the above to something that is easier to read (and
grammatically correct). I also think you may want to structure it from
big picture to small picture. So you should first mention that EBBR will
need multiple compliance test pieces to run and only then mention SCT as
the method to verify UEFI compliance.
+
+EBBR is very flexible and many features are platform dependent.
+Therefore platform owner can decide, to implement and test optional features
+with UEFI SCT.
I think a lot of the requirements that get put into this document can be
generically verified, so I wouldn't wave it off that quickly as "it's
flexible, so someone may or may not test things". Instead, I'd rather
like to see a reference in here that a test kit for EBBR is in
development and will probably not be finished in time for EBBR 1.0, but
is expected at a later point.
Alex
_______________________________________________
boot-architecture mailing list
[email protected]
https://lists.linaro.org/mailman/listinfo/boot-architecture
