> -----Original Message-----
> From: [email protected] [mailto:arm.ebbr-discuss-
> [email protected]] On Behalf Of Bill Mills
> Sent: Thursday, July 5, 2018 6:48 PM
> To: [email protected]; [email protected]
> Subject: [Arm.ebbr-discuss] [PATCH] Introduction: Add a manifesto
> 
> Tell people what to expect from EBBR in easy bullet form.
> 
> Signed-off-by: Bill Mills <[email protected]>
> ---
>  source/chapter1-about.rst | 40
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/source/chapter1-about.rst b/source/chapter1-about.rst index
> 125e400..83c682f 100644
> --- a/source/chapter1-about.rst
> +++ b/source/chapter1-about.rst
> @@ -18,6 +18,46 @@ while leaving plenty of room for innovations and design
> details.
>  This specification is intended to be OS-neutral.
>  It leverages the prevalent industry standard firmware specifications of UEFI.
> 
> +Guiding Principals
> +==================
> +
> +The following are the guiding principals of the EBBR specification and
> +its
> +process:
> +
> +- DeviceTree or ACPI
> +
> +  Describes the hardware and firmware to the OS
> +
> +- UEFI interface, not a specific codebase
> +
> +  Can be implemented by U-Boot or Tianocore/EDK2 or others
> +
> +- Implementable and useful today
> +
> +  EBBR is always defined so that current U-Boot can implement the
> + requirements

Current is too generic, better to put some version of u-boot. 
U-boot version xyx or later 

> +
> +- OS independant
> +
> +  This document may use Linux as an example but other OS's are expected
> +
> +- Multiple Architectures
> +
> +  This document addresses AArch64 today but AArch32 and others are
> + expected
> +
> +- Is designed with Embedded Hardware in mind
> +
> +  Works on today's boards
> +
> +  Simple low cost hardware recommendations for tomorrow's boards
> +
> +  Is appropriate for boards < $10
> +
> +- Will evolve
> +
> +  Future versions will add capabilities and may tighten hardware
> + requirements
> +
> +  However, existing compliant boards will remain compliant
> +
>  Comments or change requests can be sent to [email protected].
> 
>  Scope
> --
> 2.7.4
> 
> _______________________________________________
> Arm.ebbr-discuss mailing list
> [email protected]
_______________________________________________
boot-architecture mailing list
[email protected]
https://lists.linaro.org/mailman/listinfo/boot-architecture

Reply via email to