Generic sm8550 devicetree is split into a dtsi. Move it into its own DTB
and preserve the boards as overlays.
When not using overlays, 264 KB needed to store the sm8550-mtp.dtb and
sm8550-qrd.dtb. When using overlays, 188 KB is needed to store
sm8550.dtb, sm8550-mtp.dtbo, and sm8550-qrd.dtbo; where the overlays are
~36 KB.
Also add the board-ids for these DTBs.
This change is not intended to be merged, it breaks aliases and I doubt
it boots correct. The intent here is to show how board-id could be used
with a DTB and DTBO.
Signed-off-by: Elliot Berman <quic_eber...@quicinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 4 ++++
.../dts/qcom/{sm8550-mtp.dts => sm8550-mtp.dtso} | 24 ++++++++++++++++++++--
.../dts/qcom/{sm8550-qrd.dts => sm8550-qrd.dtso} | 22 +++++++++++++++++---
.../boot/dts/qcom/{sm8550.dtsi => sm8550.dts} | 8 ++++++++
4 files changed, 53 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile
b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e12..7f137f274d8c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -233,6 +233,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
+
+sm8550-mtp-dtbs := sm8550.dtb sm8550-mtp.dtbo
+sm8550-qrd-dtbs := sm8550.dtb sm8550-qrd.dtbo
+
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
b/arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
similarity index 98%
rename from arch/arm64/boot/dts/qcom/sm8550-mtp.dts
rename to arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
index c1135ad5fa69..0ee4614719ca 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dtso
@@ -4,9 +4,12 @@
*/
/dts-v1/;
+/plugin/;
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8550.dtsi"
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
@@ -17,13 +20,30 @@
#include "pmr735d_a.dtsi"
#include "pmr735d_b.dtsi"
+#define BOARD_ID qcom,soc = <QCOM_ID_SM8550>; \
+ qcom,platform-type = <QCOM_BOARD_ID_MTP 0>
+
/ {
+ board-id {
+ BOARD_ID;
+ };
+};
+
+&{/} {
model = "Qualcomm Technologies, Inc. SM8550 MTP";
compatible = "qcom,sm8550-mtp", "qcom,sm8550";
chassis-type = "handset";
+ /**
+ * Redefine the overlay in the DTBO so the sm8550-mtp.dtb that Kbuild
+ * generates has accurate board-id.
+ */
+ board-id {
+ BOARD_ID;
+ };
+
aliases {
- serial0 = &uart7;
+ // serial0 = &uart7;
};
wcd938x: audio-codec {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
b/arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
similarity index 98%
rename from arch/arm64/boot/dts/qcom/sm8550-qrd.dts
rename to arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
index d401d63e5c4d..f756c50a80b9 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dtso
@@ -4,10 +4,14 @@
*/
/dts-v1/;
+/plugin/;
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sm8550.dtsi"
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
@@ -19,13 +23,25 @@
#include "pmr735d_b.dtsi"
/ {
+ board-id {
+ qcom,soc = <QCOM_ID_SM8550>;
+ qcom,platform = <QCOM_BOARD_ID_QRD>;
+ };
+};
+
+&{/} {
model = "Qualcomm Technologies, Inc. SM8550 QRD";
compatible = "qcom,sm8550-qrd", "qcom,sm8550";
chassis-type = "handset";
+ board-id {
+ qcom,soc = <QCOM_ID_SM8550>;
+ qcom,platform = <QCOM_BOARD_ID_QRD>;
+ };
+
aliases {
- serial0 = &uart7;
- serial1 = &uart14;
+ // serial0 = &uart7;
+ // serial1 = &uart14;
};
wcd938x: audio-codec {
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi
b/arch/arm64/boot/dts/qcom/sm8550.dts
similarity index 99%
rename from arch/arm64/boot/dts/qcom/sm8550.dtsi
rename to arch/arm64/boot/dts/qcom/sm8550.dts
index c68e08747b6f..3546ea4b96f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dts
@@ -3,6 +3,9 @@
* Copyright (c) 2022, Linaro Limited
*/
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sm8450-videocc.h>
#include <dt-bindings/clock/qcom,sm8550-camcc.h>
@@ -32,6 +35,11 @@ / {
chosen { };
+ board_id: board-id {
+ qcom,soc-version = <QCOM_ID_SM8550 QCOM_SOC_REVISION(1)>,
+ <QCOM_ID_SM8550 QCOM_SOC_REVISION(2)>;
+ };
+
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
--
2.34.1
_______________________________________________
boot-architecture mailing list -- boot-architecture@lists.linaro.org
To unsubscribe send an email to boot-architecture-le...@lists.linaro.org
