Hi Pam, Did you go into the support information mode and then start the re-calibration process? Go to the options menu with space with o, then press space with i to get into support information mode, and then press the letter r to start the battery re-calibration. You will need to have the AC adapter plugged in for this process, and you will need to be prepared for this process to take quite sometime to go all the way through. And, while it is going on, you won't be able to use the unit. But, with the mPower, it is all automatic. The battery first appears to charge up, then talks until it goes flat, and then charges up again. And, while this is all going on, you can press the spacebar to get a status report. ----- Original Message ----- From: "Pam Quinn" <[EMAIL PROTECTED]> To: "Bn List" <[email protected]> Sent: Sunday, January 15, 2006 9:39 AM Subject: [Braillenote] battery gage
Hi, An o chord p started giving me the message that the battery gage needs recalibrating and is not accurate enough to give a percentage reading. So I let the battery go completely flat. But now I'm charging the battery and still getting the same message. Any suggestions? Pam ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
