Hello all, Usually when the older units showed 99 percent after being charged! I simply used my BN till I got it down to around ten percent. I then did the calibration process till it ran down. I then charged my battery in that unit and everything was fine. The M-power will go to a hundred percent after the unit has been unplugged. It takes care of calibration if the battery has been discharged too much so it is better in the newer units. I'd say simply use your BN or M-power and you won't need to worry much about calibrating!
Jim > ----- Original Message ----- >From: "CATNIP" <[EMAIL PROTECTED] >To: "Braillenote List" <[email protected] >Date: Fri, 30 Sep 2005 17:24:44 -0700 >Subject: Re: [Braillenote] Reason for calibrating the battery on the BN >Carl, convoluted isn't the word! Ha. But I always plug my BN into AC power >when it's not being used because after I first got it it drained nearly all >its battery life just sitting on the shelf and I didn't want to risk that. >So when my battery said 99% when I unplugged it, believe it or not, but I >trusted that reading. Now that I asked it about its battery power it tells >me it's not calibrated correctly. Ho hum. Fortunately I'm just going to >wait for my M-power transplant and take my chances with the present BN. >LOL. >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote
