Hello again Kelly and list, The first thing you need to understand is the serial number on my Juliet Embosser isJ0002.This simply means my Juliet was the second one made. There have been some hardware upgrades put in since I bought it but for some reason, I haven't been able to get the serial port or what I thought was the serial port working with much of anything! There may be a few bent pins in that port. It was never fixed when my embosser went back for repair. Up till now, the printer port has worked well and I never had to worry about setting parameters etc. I have used the serial port in my Blazer but when my devices could use the printer port, I went with that because of the ease of use and getting down to business right away! I believe the ET embosser has a USB port but haven't checked that information lately. I may contact Enableing to see what more they suggest as well as phone Humanware. There is some kind of infrared gadget that can be connected and the BN M Power might be able to utilize the i nfrared port. I simply need to check out the possibilities further.
Jim >----- Original Message ----- >From: "Dan Kelley" <[EMAIL PROTECTED] >To: "Braillenote List" <[email protected] >Date: Sun, 30 Oct 2005 11:21:30 -0500 >Subject: RE: [Braillenote] clocks >If you wanted to pursue it, you can get a null modem cable that has a 9-pin >female on one end for the bn and a 25 pin male on the other for the juliet. >Then get out your Juliet manual and set it up for serial. You can make menu >1 a parallel menu for the PC and menu 2 serial for the bn. >I'm not sure I know what you mean about some pins not being right on your >Juliet. >Good luck with it >Dan Kelley >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote
