As far as I remember, the PK doesn't have a dedicated chip that keeps track of remaining battery charge, so it's all worked out from voltage. So if it doesn't reach a certain voltage while charging, it won't get to 100%. But this is only an approximate way of doing it, since the relationship between charge and voltage isn't linear - if you draw it it's more of an S-shape than a straight line. So don't worry too much unless you're getting unsatisfactory battery life, when it might need a new one... 18 months or 500 cycles is about as much as you can expect.
It's normal for batteries to appear to have a higher voltage when they are being fast charged. This is because you're forcing electrical energy into the battery ... so the readout is the battery's energy plus the energy you're pushing into it. The mPower for example hope that helps, Andy ---- Andrew Riden Software Development Engineer HumanWare Ltd. 11 Mary Muller Drive, Christchurch, New Zealand. DDI +64 3 940 2264 Fax +64 3 384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
