I just got a transplant from the Braille Note classic to the MPower. I teach blind children, so do a LOT of embossing of materials. My old classic wouldn't emboss on both sides of the paper, even though I set it up to do so in the Embosser setup list, and my embosser is made to emboss on both sides of the paper. I had no trouble with its doing so when I used a Braille Lite 40. I'd like to know how I can fix this problem. Also, I used to emboss using a parallel port. I am now trying to use the serial port because the Edgeport converter is too expensive for me at this time. I set the embosser and Braille Note for the serial port, and the embosser is working fine, except that, even though I have set a page length of 25, there is no top margin on the pages that I've embossed.
I've tried everything I know to fix these two problems, but nothing has worked so far. I'd appreciate any advice anyone has!!! I even called tech support at Hunanware about my machine's failure to emboss on both sides of the paper. The person who left a message on my voicemail from tech support said, "It should emboss on both sides of the paper if your embosser does that," or something to that effect. I know my embosser is supposed to emboss on both sides of the paper but it hasn't done so since I've gotten a Braille Note. Thanks again for any help!!!!! Deborah Prost emboss on both sides of the paper. ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
