2.1.5 How to manually recalibrate the Battery. To manually set
up the BrailleNote BT to recalibrate its battery, you will need a
spot where it can chatter away to itself without disturbing
anyone, with a nearby power socket to connect the AC adapter. 1.
On the BrailleNote BT, make sure you have no unsaved work. It is
very important that you remove any storage cards, or card or USB
devices.
2. Go to the Options Menu by pressing SPACE with O.
3. Press SPACE with I. KeySoft will display "Support
Information Mode". 4. To select the option "Recalibrate
the Battery gauge", press R. If you haven't already plugged
in the AC Adapter, you will be asked to do so.
5. What KeySoft does next depends on how much charge is left
in the battery at this time, however it is all automatic. It may
not start up initially but when the process gets to the point of
discharging the battery, KeySoft will talk repetitiously to help
it to do so, thus the need to choose a spot where the noise won't
bother you. Once the battery is flat, KeySoft will automatically
initiate the recharging cycle. When the whole cycle is complete,
KeySoft will display: "Battery Test Completed."
You can check the status of the recalibration process at any time
by pressing SPACE. This will give you the times for the various
charge and discharge stages depending on which stage it is in.
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
