Robert, Sounds like you may want to consider doing a service reset.
Remove all cf sd and any other cards from the MPower and be sure you close any open documents. Do a service reset by holding down the record button on the side of the unit and press reset. You will have to reset time and date after the MPower comes back up. Sounds like you've tried just about everything else. Don On Sat, 01 Jan 2005 01:55:52 +1200, robert stigile wrote: Hello Rhonda, I have fixed my e-mail problem, but the sd card issue still exists. What is happening, is when I insert the sd card, it does not say anything. If I turn the unit off, and then back on it will still say nothing, but if I remove the card at this point, and then reinsert it, it says card ready, I can then view the folders, but if I enter on one of them, there are no files being shown. I have tried two different cards, and I have the same problem but they both have files on them, and they both worked on the old mpower. I don't know what to do at this point. Thanks for your help. Robert ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote __________ NOD32 1.1458 (20060324) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
