Hi don, I have tried all of your suggestions. They ben very helpful. I am not sure that this really works with bluettoth all that well. I give up as nothing works on this end. So thank you very much. I'm going back to just using my maestro and phone to get the info I need.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Don Bishop Sent: Wednesday, April 12, 2006 10:09 PM To: Braillenote List Subject: Re: [Braillenote] Active sync Hi Denise, What you might want to do at this point is to delete all existing partnerships on your pc. To do this, disconnect your MPower from the pc to be sure Activesync is not connected anywhere. Then open activesync and access the files menu and arrow to delete partnership. It should allow you to delete any or all partnerships. After you delete the partnership, make sure you also haven't inadvertently set up an additional one. Keep deleting until you get the message that delete partnership is not available. Then, Connect your MPower and pc and when activesync comes up and asks for a partnership, hit enter on "yes". You should then get the list of 7 check boxes for synchronization. You want to uncheck all of these except possibly for the one for file synchronization if you want to do that. Note that this just synchronizes a file or files you place in a specific directory on the pc which is created by activesync to the same files on a special directory on the MPower which is also created by activesync and should't be confused with syncing contacts or the planner. You use keysync for syncing the contacts and/or planner. Also, you may want to do a 4 5 6 (j k l) reset on the MPower before you try to create the partnership to be sure it's also deleted from the MPower end of things. Remember that if you have to do a 4 5 6 (j k l) reset for any reason, the partnership you previously created will no longer exist when activesync on the pc tries to connect to the MPower. This all sounds rather complicated, but it really is quite easy once you've done it a time or two. Don On Wed, 12 Apr 2006 21:40:56 -0500, denise avant wrote: Hi all, I think I have one more step to go before I can finally sync my planner and contacts list. Now the problem is active sync. I have installed active sync 3.8. during the installation, I was asked which partnership I wanted, and I chose standard. Yet, when I tried to sync with the bn via bluetooth, which seems to be set up properly now, the bn said it could not find a partnership. I looked under file and saw that delete partnership and get connected were marked as unavailable. The other thing is I seem to remember in prior versions of active sync, I had to specify the name of the partnership. But I didn't see it this time during installation. P.s. One of these days I'm going to actually sync my planner and contacts with the bn. Thanks. ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote __________ NOD32 1.1486 (20060412) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
