just to mention in general that for a fast response it's useful to include the model and type of your machine, since a lot of things depend on a) keyboard type and b) mPower / classic / PK-ness of your unit. This is merely a suggestion and I'm not in any way complaining! now onto batteries ...
Well, you can recalibrate the battery in the way I've just explained, or you can just run it until the battery is empty and then recharge it to full. The classic has a slight problem in reporting whether the battery gauge is accurate; but you can still get the percentage left by going into support information mode and pressing P - I have just checked this on a QT model: So BT - press SPACE with O, SPACE with I, then P to get the level and QT - press FUNCTION with O, READ with I, then P to get the level and BT - press SPACE with O, SPACE with I, then F to start calibration QT - press FUNCTION with O, READ with I, then F to start calibration regards, and thankyou Joseph! Andy. ---- Andrew Riden Software Development Engineer HumanWare Ltd. 11 Mary Muller Drive, Christchurch, New Zealand. DDI +64 3 940 2264 Fax +64 3 384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
