Hi Jonathan; Is 7.01 optional or is it necessary for 7.2 to work. I have been at convention and missed you and did not get to read your demo yet. I asked where you were and also checked out the scan-r. See you in Atlanta! Terry Powers
-----Original Message----- From: Jonathan Mosen on BrailleNote mPower [mailto:[EMAIL PROTECTED] Sent: Friday, July 07, 2006 10:01 PM To: Braillenote List Subject: re: [BrailleNote] some concerns with 7.01 installation Hi Joseph and all. Firstly, I am only aware of one SAID card error reported to this list regarding the 7.01 update. It may be a hardware issue, it is difficult to say. However HumanWare technical support will be happy to assist. Regarding the steps to take for the 7.01 upgrade, and I am talking specifically about BrailleNote and VoiceNote mPower, all a current 7.0 user has to do is to copy the nk.bin file on to an SAID card that is less than 512 MB and formatted in FAT 16. We provide a utility to prepare the SAID card if the card is not formatted for FAT 16. The only file that needs to be on this card is nk.bin. Then perform a 4-5 or JK reset and the upgrade begins automatically. No product key or boot loader is required if you are already running 7.0. I can tell you I've done hundreds of these with success every time. Jonathan ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
