Melissa, using a 6.11, and upward, in my experience, <grin>,
others aren't having this problem, I've noted the calculator has
no problems with the QWERTY, but it seems to be different for the
BT.
Warm Regards,
Rhonda Clark,
Illinois
----- Original Message -----
From: "Melissa Keys" <[EMAIL PROTECTED]
To: "Braillenote List" <[email protected]
Date sent: Mon, 11 Sep 2006 13:52:14 -0500
Subject: Re: [Braillenote] Problems with classic BT 32
Hi Rhonda. Thanks so much for your prompt reply and good
suggestions. I
did the reset and I'll see if anything changes. Do you know if
they fixed
the calculator problem? Thanks.
Melissa
----- Original Message -----
From: "Rhonda Clark" <[EMAIL PROTECTED]
To: "Braillenote List" <[email protected]
Sent: Sunday, September 10, 2006 9:05 PM
Subject: re: [Braillenote] Problems with classic BT 32
Melissa, I would try going from Main Menu, and go in to Key
Word. Go to
your Dictionary Folder on the Flash Disk. Press Enter. Press
the Space
bar once to see "list of files", and press Space with X. When
you see the
list of all files prompt, go down to the keysoft.ksd file.
Press
Backspace C. When you are asked if you are sure you want to
erase it, say
yes. Don't go to the main menu, but do a reset there.
Everything will go
back to default. Your emails will be in the "all" folder, but
you won't
lose them. See if this helps.
Warm Regards,
Rhonda Clark,
Illinois
----- Original Message -----
From: "Melissa Keys" <[EMAIL PROTECTED]
To: <[email protected]
Date sent: Sun, 10 Sep 2006 20:52:21 -0500
Subject: [Braillenote] Problems with classic BT 32
Hi. I am using a BN classic with a BT Keyboard running 6.1. I
was wondering about some strange behavior.
1. When I get the "Battery is Critical" message and plug the
unit in, after a full charge the unit resets when I turn it on.
I hear
the beep and the whole thing resets on its own, it never used to
do this
before and all of a sudden it does... why? It is kind of
annoying since I
have to reset the date and time each time I charge the battery!
2. I tried to reset the precision or number of digits shown
after a decimal point in my calculator. It's stuck at zero
digits and I
cant' change it. I followed the instructions in the userguide
but can't
figure out what I'm missing there. Maybe someone can help?
These things may have been mentioned before, but I have been away
from the list for sometime and joined again just in time to hear
about all
the latest BN gossip. Maybe I'll upgrade, but not any time
soon. Thanks
for all your help and I hope to hear from someone soon.
Melissa
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
