Mickey, Before you start, go to Bootloader with Reset with dots 4-6 (JL). Turn debugt on with 3 switch. Press 4 to restart KeySoft. You should have connected the serial cable and you must run the terminal program and you should also match the settings before you start debug mode. 1. Go to Internet. 2. Type in an address of the web page that you know it is large e.g. en.wikiedia.org. 3. At the connection configuration name, use the connection that uses LAN. After few seconds, you'll notice that it will start to hang. The memory value might have gone up by now. 4. Press space with e or z. It should say the message, "exception: command: 306 at number." This is the steps that I've took. It seems that Reset tends to help at this point. P.S. Thanks for changing the subject.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mickey Quenzer Sent: Wednesday, September 27, 2006 9:50 PM To: Braillenote List Subject: [Braillenote] PROBLEM: Exception: command 306 Hello Joseph: Can you duplicate this problem? I would appreciate it if you could give me step by step instructions so I can try and duplicate this problem. I am vary interested in tracking this one down! As you can see, I've changed the subject. This will help us keep track of the related messages. ******* Mickey Quenzer ******* ******* Humanware Technical Support ******* ******* Email: [EMAIL PROTECTED] ******* ******* web site: www.humanware.com ******* ----- Original Message ----- From: "Joseph Lee" <[EMAIL PROTECTED]> To: "'Braillenote List'" <[email protected]> Sent: Wednesday, September 27, 2006 7:48 PM Subject: [BrailleNote] Exception: command 306 > Dear list members, > Even though I consider myself an avid user of the BrailleNote, I had to > post > this because of some e`ception commands has occurred. > Whil loading a large page using Network Connction, the BraillenOte somehow > hang. I pressed Space with Eto exit the loading process and suddenly a > message appears, "exception: command: 306 at 1451. Data misallignment." I > don't know what this is. Also, it tends to use more memory when loading > large pages, and the memory value goes down when you return to previous > page. I'm not an expert in the field of programming (that is the field > that > I'm not interested in), so, if there are any news with this issue that > I've > experienced, let us know. > > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.humanware.com/mailman/listinfo/braillenote > ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
