Hi Diane:

Hope this information about upgrading will help.

First of all, prepare your Sd card if necessary. To do this, do the following:

If you have not prepared your SD card, you will want to do that before downloading the upgrade.

From the Main Menu, press U. Press A. At the "run program from
which drive" prompt, press K for Keysoft. You will see "directory name"? I generally press T chord so that I can see the folder mode, though some people don't. Go down to the Windows folder, and press Enter. Press Space once to get to the "list of files" prompt. Press the letter P twice, so that you see "prepare SD card. Press Enter. You will receive the warning that any information on your card will be lost, and you will be asked if you are sure you want to proceed. Press Y. Follow the prompts. You will be returned back to the Utilities Menu.

Downloading the Product Key

1. From the Main Menu, press I for the internet. Write in humanware dot com slash Resources slash KeySoft 7.2 Upgrade dot asp. When you see your Humanware information come up, press the letter P three times. When you see "Product Key, Press Enter. You will see "Log in". Press dots 46 chord, (tab). You will see "serial number". Enter the serial number in lower case. Press dots 46 chord (tab) again, and your password will be frog 1. Press dots 46 chord (tab) again, and you will see "Log in button". Press Enter. Press dots 56 chord (Read with 9) six times until you see, "downloads available". Press dots 46 chord (tab) to see 7.2. Press dots 46 chord (tab) once more to see "download button". Press Enter. You will see "download Package. Press the Space bar once. You will see "download in to which folder"? Press Backspace (Ctrl D until you see "drive list". You will press S. for the SD card. Press Enter. At the "filename" prompt, press Enter. After a few beeps, you will see download is complete.

2. To install your Product Key, go to Main Menu. Press U, then press A. At the "run application from which drive" prompt, press Backspace, (Ctrl D to get to the "drive list". Go to the SD card, and press Enter. You will see "directory name". Just press Enter. Press space to see your Product Key, and press Enter. Follow the prompts, pressing Enter at the Command Line. You should get "installation of the Product Key was successful" message.

Downloading the Upgrade

1. From Main Menu, press I to go back to the internet. Go back to the humanware dot com slash Resources slash KeySoft 7.2 Upgrade dot asp site. Press Enter. Press dots 56 chord (Read with 9) until you see 7.2 download. Press Enter. You will be asked which drive, folder and file you want to download in. Make sure you are at the SD card drive. I generally download my product key and upgrade in the "none" folder. If you are using dial up, this will take a long time to download. Make sure you get "download of 7.2 complete.

2. Once you have downloaded the upgrade, make sure your unit is plugged in. Make sure you have no other cards in your slots. Press a reset with dots 45. You should hear tones. Do not disturb the unit in any way while it is downloading.
Have a wonderful day!

___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote

Reply via email to