it says last measured discharge 1444 and design capacity 1800.
Kevin
----- Original Message -----
From: "Joseph Lee" <[EMAIL PROTECTED]>
To: "Braillenote List" <[email protected]>
Sent: Friday, January 05, 2007 11:46 AM
Subject: Re: [Braillenote] Battery Conditioning Recommended
Kevin,
What does the d value say?
----- Original Message -----
From: "Kevin Chao" <[EMAIL PROTECTED]
To: "Braillenote List"
<[email protected]
Date sent: Fri, 5 Jan 2007 00:58:07 -0800
Subject: Re: [Braillenote] Battery
Conditioning Recommended
Joseph,
I have tried using the manual recalibration
method by fully drainning the
battery until the unit shuts itself off, then
letting it harge fully two
times with the same message. I have checked
both the c and d values and the
both match when the battery is fully charged,
and the c design capacity is
higher than the last measured discharge.
I am looking to see if you have further
suggestions.
Kevin
----- Original Message -----
From: "Joseph Lee"
<[EMAIL PROTECTED]
To: "Braillenote List"
<[email protected]
Sent: Thursday, January 04, 2007 8:48 PM
Subject: re: [Braillenote] Battery
Conditioning Recommended
Kevin,
Check the following from Support Info Mode:
c value: when it is fully charged, it should
match d value.
d value: if the value displays that it is
significantly higher than the
designed capacity, then it is time for
recalibration.
How long it has been since you've last
recalibrated your battery?
Here's the factor: If the designed capacity
is 1800 and if your battery
capacity is 2000 or greater, then it is time
for recalilration (anything
above 1800 means that it is time for
recalibration). If the designed
capacity is 1650 and the battery capacity is
1750 (anything greater than
1650), then it is time for recalibration.
Try recalibrating your battery (using any
method you like, such as manual
or using Support Info Mode commands such as
f, g, or r).
HTH,
Joseph
----- Original Message -----
From: "Kevin Chao" <[EMAIL PROTECTED]
To: "Braillenote List"
<[email protected]
Date sent: Thu, 4 Jan 2007 19:46:47 -0800
Subject: [Braillenote] Battery Conditioning
Recommended
I am getting the message "battery
conditioning recommended" when i check the
battery level using the space
with o followed by the p key. Also when I
press space with o to get into
options, then space with i to get into
support information mode, then a
to get the accuracy of the gauge; I get the
message "battery conditioning
recommended, error plus or minus 5%." I was
wondering if anyone has any
recommendations of what I should do. If it
is a recalibration of the
battery, which should be performed.
Kevin
___
To leave the BrailleNote list, send a blank
message to
[EMAIL PROTECTED]
To view the list archives or change your
preferences, visit
http://list.humanware.com/mailman/listinfo/br
aillenote
___
To leave the BrailleNote list, send a blank
message to
[EMAIL PROTECTED]
To view the list archives or change your
preferences, visit
http://list.humanware.com/mailman/listinfo/br
aillenote
___
To leave the BrailleNote list, send a blank
message to
[EMAIL PROTECTED]
To view the list archives or change your
preferences, visit
http://list.humanware.com/mailman/listinfo/br
aillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
