Hello again Kendell,
I just noticed one thing you said that I failed to see with my first
message. That has to do with formatting the 4 GB CF card as fat32.
Actually it has to be formatted as fat32 because the largest regular fat
or fat16 drive can only be 2 GB. My Sandisk card came formatted as fat32
from the manufacturer. Unless you reformatted yours as old style fat, I
would guess yours is also already formatted fat32. If not sure, copy your
files off to some other location and go ahead and do a fat32 format and
try again to load your card with the folders and files you wish to place
on it. At this point, if it fails to work with your note taker, then I
would guess it has something to do with the brand of card. I have seen
messages on this list from people mentioning the use of even larger CF
cards so know it is not the size of card that is causing your problem.
Richard Ehrler
On 2007-02-14 [EMAIL PROTECTED] said:
Kendell,
I have a Sandisk 4 GB CF card that seems to work fine. I have
something like 3 GB already on that card and have not noticed any
problems accessing files on it, either on the computer or on the
VoiceNote mPower. I wonder if the problem is caused by brand of
card rather than size. I have run into information with several
products indicating recommended card brands because of subtle
differences between brands that can cause problems. Maybe one of
the tech support guys can respond to this question with a more
complete answer.
Richard Ehrler
----- Original Message -----
Date sent: Wed, 14 Feb 2007 22:23:36 +0000
Hello list members:
I have a transcend 4gb sd card. I wrote a lengthy email on how to
fix the
problem of the BN mnot seeing folders and files put on the card
via
computer. The process works, but after 1.2 gb of the card is
used, the
mPower will not except anymore files onto the card, period. The
computer
does just fine, it's just the bn. an someone please tell me how
to fix this
problem? I'm considering formatting the card in fat32 but haven't
yet. I
think it maybe an issue with the sdmmc drivers that control how
KeySoft
reads and writes to the card. Can someone please contact Maurice
or andy, or
whoever writes the software and ask if they will consider working
on an
executible we can run to fix the problem? So far the bn works
fine with 2
gig and below, it's just with the larger sizes it messes up on.
Thanks
Kendell
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
