Here is a message I found from Joseph
Lee in the archives.
Dear list,
Thanks to someone who've sent me a
private
email, I'm now sending you the
instructions
on how to change the startup sounds from
the
normal one to the one that you want.
You'll need a wav file that is no more
than 5
seconds long, otherwise it will cause
problems.
Notes of caution: please keep this in
mind:
* When you press Reset with dots 4-5-6
(JKL)
or if you've performed Service Reset
(mPower
only), you'll lose the sound file.
Therefore
I recommend that you make a backup copy
of
the sound file (do not name it startup
as it
will interfere with copying process).
* If you are going to use the Flash Disk
method, be sure to note the date and
time
stamp (it must be later than the default
sound file).
Method 1: Copying and renaming from
KeySoft
System Disk:
1. Copy the wav file that you want to
use to
KeySoft System DiskstWindows folder.
2. After you've copied it, go to Main
Menu,
select File Manager and press enter on
Rename.
3. At the drive prompt, select KeySoft
System Disk. At the folder name, select
Windows. At the file name, select the
file
that you've just copied.
4. At the rename prompt, tzpe startup
in
grade 1 and press enter. If it says
about
existing file, press y to replace it.
Then
KeySoft Says, "File Manager Menu." Press
Reset, and you'll hear your new startup
sound.
Method 2: copying to Flash Disk:
1. Copy the sound to Flash
DiskstWindows
folder. If it says that the folder does
not
exist, press y to create it.
2. Then go to Main Menu, select File
Manager
and select Rename.
3. At the drive prompt, select Flash
Disk.
At the folder name, select Windows. At
the
file name, select the file that you've
just
copied.
4. At the rename prompt, type startup
in
grade 1 and press enter. If it says
about
existing file, press y to replace it.
KeySoft then says, "File Manager Menu."
5. Press Reset. KeySoft will restart
and
present a message, "System Files have
been
updated, press Reset." Press Reset at
this
point. You should hear new sound.
If you have any questions, feel free to
post
it to the list.
Cheers,
Joseph
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
