Hi, Few things to try: * Try reseting your uhit while it is connected via USB cable. * Are you using the latest Windows Mobile Device Center? If so, it could be hardware; if not, install the latest version (6.1). * Try using a different USB cable (if you have one). As for transfer options, you have an option of USB thumb drives (for about $30, you can get about 8 GB USB thumb drive that will work both with BrailleNote and your computer). As for SD, yes, there are two types: regular and SD High Capacity (HC). If the sD card says SDHC on its label, then the mPower will not work with it. Cheers, Joseph
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stephen Thacker Sent: Tuesday, July 28, 2009 3:37 PM To: Braillenote List Subject: [Braillenote] USB CONNECTIVITY PROBLEMS Hello, I have an Mpower Braillenote and have managed to download all components I need for the upgrade from V7.5 to V8. Until I've installed V8, my router won't support wifi to the machine as my router uses WPA connectivity. I therefore only had the option open to me to transfer the files via usb cable from my pc to my Mpower as I don't have a cf card has it got corrupted by my pc and I don't have a usb card reader and the second sd card I have doesn't seem to be recognised by my Mpower so are there more than one type? If so, please advise what I should be using. the one i can use is full of software anyway and I don't have anywhere to store it as it seems I've got a problem with the transfer using the usb cable. As I'm using a Pentium 4 pc using Windows Vista Home Premium with SP2 (there is Windows 7 on another machine but it is away being firmware upgraded), what can I do? I have to use the Microsoft newly created Active Sync prog specially made for Windows Vista and Windows Sync Center. The Mpower BT is recognised but I am told by the programme that it's not connected despite having the cable connected to both machines and both are switched on. Could I need to use the power cable on the Mpower or if not does there need to be a high battery power needed? I look forward to any advice, but my Mpower has just come back from USB repair and the cable is relatively new. Cheers for now, Steve ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [email protected] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
