Hi,
Thanks Alex and Joseph. In the user guide, it still says not to
charge the battery, or rather, it is
recommended that the battery is charged between 5 and 35 degrees
Celsius.
Alana
----- Original Message -----
From: "Joseph Lee" <[email protected]
To: "'Alex Hall'" <[email protected]>,"'Alana Jovanovski'"
<[email protected]
Date sent: Fri, 29 Oct 2010 20:17:18 -0700
Subject: RE: [Braillenote] Battery temperature on Apex
Hi,
Alex is correct. The deprecated (removed) Support Information
Mode items
are: A (battery gauge accuracy), B (last battery discharge), C
(current
battery capacity), D (last measured battery capacity at 100%), E
(Battery
discharge voltage), F, G (recalibration log via Flash (F) and
Keysoft system
disk (G)), I, J (current battery current), K (recalibration via
forming
charge), L (last recalibration info), M (battery isolation), R
(regular
recalibration), T (battery temperature), V (battery voltage), w
(deep
discharge), Y (continuous cycle) and Z (partial charge/discharge
test). As
for the other ones:
* The Deep Sleep Mode (H) is now accessed through
Utilities/Miscellaneous
Options.
* S is now used for formatting an SD card.
* Power status (P) is available from Options Menu.
In addition, new commands were introduced as well. For a full
list of new
functions (including techie ones), I'd wish to compile them into
a new
article (not now).
In short, everything that has to do with battery status is gone
i.e. no more
calibration is necessary.
Cheers,
Joseph P.S. I knew this (battery changes) might confuse people
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Alex
Hall
Sent: Friday, October 29, 2010 7:55 PM
To: Alana Jovanovski
Cc: [email protected]
Subject: Re: [Braillenote] Battery temperature on Apex
No, this and most other support information mode functions have
either
been disabled or are no longer available on the Apex hardware.
On 10/29/10, Alana Jovanovski <[email protected]> wrote:
Hi,
Is there a way to check the temperature of the battery on the
Apex?
That option doesn't work in support information mode.
Thanks.
Alana
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
--
Have a great day,
Alex (msg sent from GMail website)
[email protected]; http://www.facebook.com/mehgcap
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
