I have received this email information from a source other than
HW.
How can one subscribe to this information source?
Welcome to the HumanWare products tips series. The tip included
below is
the first in a series of product tips that will be presented via
the
BrailleNote NewsWire. Product tips will range from frequently
asked
questions, to descriptions of simple and useful ways to
accomplish
specific tasks with your HumanWare product. We hope you find
this series
informative and helpful.
Q: After upgrading to KeySoft 9.1, how do I connect to a wireless
network?
A: KeySoft 9.1 greatly simplifies the process of connecting to
a
network. To search and connect to a network, do the following:
1. From the Main menu, navigate to the Options menu (Space
with O on BT
units, or Function with O on QT models.)
2. Press C for the Connectivity menu.
3. Press W for the Wireless menu.
4. Press Y to turn on wireless.
5. Press S to scan for the available wireless networks in your
area.
6. Press the Spacebar repeatedly until you find the wireless
network you
want to connect to and press Enter. (Note that you will need to
know the
name of the network you are searching for to find it in the
list.)
7. You are now asked to set up a connection profile for this
particul
wireless hotspot. Press the Spacebar to move to the first field
asking
for the connection configuration name. This automatically has
been
filled in with the name of the wireless signal. Feel free to
type in any
name you desire and press Enter. For example, if this is your
home
network, many people simply type "home" and press Enter.
8. If a security key is required, you will be asked to enter
it and
press Enter. Note, if you are using a BT keyboard, it must be
entered in
computer braille.)
9. Unless your IT professional has other specific settings
they require
you to fill in, the remaining questions do not apply. You are
done
setting up your wireless network. Simply exit the menu with the
Escape
key, (Space with E on BT units,) and press Y to add the profile
record.
At this point your wireless profile has been created, and in
most
situations, you will automatically be connected to this hotspot
when it
is in range. If you ever find that you cannot get online, simply
navigate to the Options menu, press C for Connectivity, and
choose the
first option in this menu called, "Connect to existing
configuration."
You can then choose the profile you've created and press Enter.
Also, one can choose to refresh the active connection by doing
the
following:
.. Navigate to the Options menu
. Press C for Connectivity
. Press W for Wireless
. Press Y to make sure it is turned on
. Press R to Reconnect
If you are attempting to receive email and are receiving
messages such as
"error 10050 or 10060 cannot connect to pop server," it is
usually
because the Apex is not connected to the internet. Performing
the above
steps will reconnect you to the web and email should function
normally.
Happy web surfing!!
The HumanWare Support Team
Unsubscribe from email communications:
httpccvisitddhumanwareddcomstunsubscribestust3332/8618906ence61en
ce8ence7f1bff853bd2ence6d3483/173836912
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
