Hi,
What Bluetooth driver - Toshiba, Witcom, etc. are you uiing? I
assume you've initiated the
pairing process from the PC. If that's the case, don't configure
JAWS settings until Apex was connected from your PC, because the
com port that PC thinks that Apex is connected might not be the
one that JAWS is looking for. Also, when choosing the braille
display, select BrailleNote signed.
Cheers,
Joseph
----- Original Message -----
From: "Philip" <[email protected]
To: "Braillenote Discussion List" <[email protected]
Date sent: Sun, 27 Nov 2011 17:26:56 -0500
Subject: [Braillenote] Apex as Braille display via Bluetooth
I have been attempting to get my apex running keysoft 9l.2.0 to
be
recognized as a Braille display under jaws 13 via Bluetooth.
I have installed the humanware jaws drivers, and assigned comm.
port 2 to be
used.
I turned on Bluetooth on the apex.
I have attempted to connect to the apex via Bluetooth from my pc.
I selected serial for the connection type.
I get the error
"connection failed"
If anyone has successfully gotten an apex to pair via Bluetooth
with a pc
under windows 7, or anyone has any suggestions, I would
appreciate hearing
about it.
Many thanks.
Phil
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
Replies to this message will go directly to the sender.
If your reply would be useful to the list, please send a
copy to the list as well.
To leave the BrailleNote list, send a blank message to
[email protected]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
