Sometimes it takes more than one reset. If that fails to work then the Blazer needs to be repaired.
Susie Stageberg Project ASSIST with Windows Iowa Department for the Blind (515) 281-1351 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Josh Kennedy Sent: Monday, February 16, 2004 10:58 AM To: Braillenote List Subject: RE: [Braillenote] braille blazer and braille note problems We tried a reset. Even if I set the paper weight to plastic the dots are still lighter on the left side of the page. Josh > ----- Original Message ----- >From: Susan Stageberg <[EMAIL PROTECTED] >To: Braillenote List <[EMAIL PROTECTED] >Date: Mon, 16 Feb 2004 09:56:48 -0600 >Subject: RE: [Braillenote] braille blazer and braille note problems >The problem with the dots being lighter on the left is within the >Blazer; try resetting the Blazer. To do this, hold down the three menu >keys while powering up; the Blazer will ay "okay to reset?" then press >those three buttons again. That should fix the dot problem. The rest of >your settings sound right; usually when you get a blank page between >pages and it brailles over the perforation, the page length needs >adjusting, but the settings you mentioned are the ones I use. >Susie Stageberg >Project ASSIST with Windows >Iowa Department for the Blind >(515) 281-1351 >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Josh >Kennedy >Sent: Saturday, February 14, 2004 2:04 PM >To: [EMAIL PROTECTED] >Subject: [Braillenote] braille blazer and braille note problems >Hi, >I have a braille note with the new motherboard, keysoft5 with Duxbury >translator. I'm having a problem embossing. First of all when the >braille blazer embosses the dots are light on the left side of the page >and get heavier as they go over. Second, after each page the braille >blazer skips a page. It also is printing on the perferations. How >should I have the forward translation options set? I tried changing >some of them with no effect. Here are my braille blazer settings. >Actually it's my friend's braille blazer, not mine. My braille note >settings are: page length 25, page width 33 page offset 2 wordrap on. >page numbering on with numbers brailled at top right. Also, do I have >to translate the .txt file to a .brl or .brf file before telling it to >emboss page numbers? or can the emboss option automatically add page >numbers to the .txt file? Can a .doc file be translated into grade two >braille and brailled? Ok, now here are the blazer's settings: port >parallel, paper feed push-out, left margin zero, right margin 34, top >margin 0 and bottom is zero also. Page length is zero. paper length 11, >auto linefeed off braille six dot, label mode off. Graphics mode is >turned off. I'm trying to print a 210 page satellite television channel >listing for my friend so he can reference it when he needs to. Also, >the top cap to the button on the blazer came off and it looks like the >cap is about to fall apart. Is the braille blazer the cheapest braille >embosser that he can get? >Thanks for your help >Josh >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.pulsedata.com/mailman/listinfo/braillenote
