First, try doing a simple Reset, and then check to see if it's there. If it isn't, try doing some housekeeping if you're very low on Flash Disk space, try again, do a simple Reset if it's not there, and check again.
If that still doesn't work, use File Manager>Directory to view the Manual folder of the FLASH DIP (not the KS Disk), and make sure the only two files in there, in your case, are BNB.exe and USbNB.exe. Erase all others, exit the File Manager, perform a simple Reset, and check for your User Guide. If it's still not there, via Utilities Menu>Application Program, run the two aforementioned files, IN THAT ORDER (the latter determines which version of Chapter 8 your manual contains, depending on whether you have a US model and use Nemeth or a UK model and use British maths), and leave the "Command Line?" prompt blank. Remember that these are the files in the Manual folder of the Flash Disk. When you're back up and running, check for your User Guide. If it's still not there, reinstall KeySoft 5.1, and remember to do a Reset with dots 1-2-3 before running the KS 5.1 executable file via Utilities Menu>Application Program. Check for your manual after installation completes. Every time you check for your User Guide, make sure you have the correct version, by selecting to lookup from the index, and pressing V at the index. Reinstalling 5.1 will put the correct version in if all other methods didn't install the correct version. HTH, Maria
