Are you changing the setting of Computer Braille from 8- to 6-Dot in Keyboard Settings or Braille Display Options? It sounds like you're being directed to do so under Braille Display Options, but this will only affect how Computer Braille is displayed on your Braille display and not the way in which you can input it with the keyboard. Because you can produce the function of the ENTER key by pressing ENTER with SPACE, I'm thinking the setting in Keyboard Settings is still set to 8-Dot Computer Braille. To get to Keyboard Settings, you would press SPACE with O to get into the Options Menu, then K to get into Keyboard Settings, then SPACE until you see the item which reads, "Use 6 or 8 dot Computer Braille?" (I believe it's about the fourth item down). If that's set to 8-Dot, there's your problem, so you would type the letter F, which the BN will interpret as a 6, hit ENTER to accept, and exit. Then, try using the ENTER key again.
I don't think the keyboard would have damaged it, but if your Keyboard Settings are in 6-Dot and the ENTER key is still not functioning, there may be some type of hardware problem which could have been caused by the keyboard. I really wasn't clear where you were changing the setting, though, so I hope this is of some help. HTH, Maria >----- Original Message ----- >From: Leslie P Peterson <[EMAIL PROTECTED] >To: [EMAIL PROTECTED],[email protected] >Cc: >Sent: Sun, 20 Feb 2005 19:09:55 -0600 >Subject: Re: [Braillenote] Restore ENTER key? >Rhonda: >Yes, I know I can use Space+8-dot for ENTER. I also know I can click the >joystick for ENTER. >NOTE: I used to press 8-dot alone (without Space) was work. Remember, >Backspace is work without spacebar. That was why there is changed after >I connected and disconnected PS2 keyboard. >Am I clear? >Leslie--
