Hi Jeff,
You have an interesting possibility here! I'm trying to get my BN to work
on the wireless network, then hopefully I'll get my wife's unit to work on
the network as well so we will have two BN units that need to work with the
network. Hopefully, one can enter the codes for both cards. If it is a
general code that all ambicom cards have, then entering this code would be
a synch I suspect! I'll have my friend check this out!
Thanks for this possibility!
Jim Aldrich
At 03:20 PM 04/01/2005 , you wrote:
Hello Jim:
I have a VoiceNote with an Ambicom card and am connecting to my linksys
router with no difficulty. The 10 digit WEP key (Unfortunately) is still
visible even after entry. If the WEP code is a 10 digit code and has only
digits 0 thru 9 and/or letters A thru F in it, then it probably already is
in Hexadecimal so no conversion should be necessary.
When you set up your router, did you use something called MAC address
filtering?? Mac address filtering is basically giving the router a list of
authorized network access devices that can access the internet. Each device
(Network card, modems, and yes, wireless access cards) have a unique MAC
address usually written on a sticker somewhere on the device. In the case of
the Ambicom card, the code is on a sticker on the bottom. On the sticker,
there are two bar codes, underneath the top bar code is the MAC address
which is a 12 digit code usually beginning with 00. Sorry, but you WILL
need sighted assistance for this one. There is currently not a way in the
Keysoft environment to read the MAC address like there is under windows.
You should go to the configuration page for your router and see if MAC
filtering is enabled. ON my router, the MAC address filtering is under the
wireless tab. The list of authorized MAC address is on a linked page right
next to the choice of whether or not to enable it. If it is, find the list
on that same page or on a linked page and add the MAC address of the Ambicom
card. IN the case of my Linksys router, the digits are entered in pairs
separated by colons (:).
If you do not have MAC filtering enabled, then disregard everything above
and we'll keep working at it.
hth
Jeff
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
