Oh that's right I didn't think of that. Josh
> ----- Original Message ----- >From: "Powers, Terry (NIH/OD/DEAS)" <[EMAIL PROTECTED] >To: 'Braillenote List' <[email protected] >Date: Tue, 10 May 2005 09:03:44 -0400 >Subject: RE: [Braillenote] reading and editing documents >Will; >How could you do something like that when the BN is not is wide as a piece >of paper. You would not have the same effect as you would if you Brailled >it out. What if the Title was longer than line 1 of the BN, how could you >tactually feal it centered. It might put the first half on the far right of >line and the second half on the far left of line. Would you still call this >centering? Not me. >Terry Powers >-----Original Message----- >From: will [mailto:[EMAIL PROTECTED] >Sent: Tuesday, May 10, 2005 8:51 AM >To: Braillenote List >Subject: Re: [Braillenote] reading and editing documents >josh >i mean can i see the line centred on the braille display not printed on an >embosser >sorry should have been clearer >will >----- Original Message ----- >From: "Josh Kennedy" <[EMAIL PROTECTED] >To: "Braillenote List" <[email protected] >Sent: Tuesday, May 10, 2005 2:32 PM >Subject: re: [Braillenote] reading and editing documents >> Yes, do the following. Go into keyword and act as if you're going to print >> a file, go to the setup printer prompt, at the printer port? Prompt. press >> control space until you hear file. Then down arrow until you hear printer >> type? This should be set to standard. Then press escape and y to confirm >> changes and make sure your margins are set to 66 lines per page... One >> inch is 6 lines down and one inch is 10 characters across width wise. >> Print letters I imagine are taller than they are wide. Now print your file >> and you will hear printing complete or something like that in either case >> you'll be back at the keyword menu. Now go to file translate and export, >> choose to export from the keysoft system disk from the none folder and >> you're looking for a file called print to file.txt. Export this as a file >> and save it where you want to and in whatever filetype you want. You can >> do the same when you emboss a braille file. You can emboss to a braille >> file and do the print to file that way as well. >> Josh >>> ----- Original Message ----- >>>From: will <[EMAIL PROTECTED] >>>To: Braillenote List <[email protected] >>>Date: Tue, 10 May 2005 10:10:22 +0100 >>>Subject: [Braillenote] reading and editing documents >>>hi >>>i have a document that i am typing in keyword >>>instead of seeing the centre command on the display can i actually see the >>>line centred? >>>so can i read and edit the document,and see my results, not just the >>>commands for them? >>>after centring i asusme it goes back to left justified? >>>will >>>___ >>>To leave the BrailleNote list, send a blank message to >>>[EMAIL PROTECTED] >>>To view the list archives or change your preferences, visit >>>http://list.pulsedata.com/mailman/listinfo/braillenote >> ___ >> To leave the BrailleNote list, send a blank message to >> [EMAIL PROTECTED] >> To view the list archives or change your preferences, visit >> http://list.pulsedata.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote
