Lisa, Surround your HTML e-mail with Block Markers, Store the block to a document with a .htm extension, and open the document in KeyWeb.
1) Open the HTML e-mail. 2) If you are not at the top already, press [SPACE with dots 1-2-3], [READ with T] to get there. 3) Press [SPACE with B], [CONTROL with B] to enter the Block Commands Menu, and press T to insert a Top-of-Block marker. Alternatively, but only if you have a BT because there is no QT equivalent (and this is an undocumented shortcut), press BACKSPACE with M to produce the Top-of-Block marker without entering the Block Commands Menu. 4) Move to the bottom of the e-mail with [SPACE with dots 4-5-6], [READ with B]. 5) Press [SPACE with B], [CONTROL with B] to go to the Block Commands Menu, and press B to enter a Bottom-of-Block marker. Note that there is no alternative here to inserting the marker than to enter the Block Commands Menu. 6) You are back at the Block Commands Menu because KeySoft assumes that now, you have inserted both a Top-of-Block and Bottom-of-Block marker, and you now want to manipulate this marked block of text. The assumption is correct in this case, so stay in the Block Commands Menu, and press S to Store the block. 7) Choose a location for your block, and at the "Document Name?", type the name of a nonexistent document. Make sure you type in a .htm extension, and after pressing ENTER, press Y to confirm creation of the new file. Note that your e-mail is still present, but it's also now stored in an HTML file. 8) Press [ENTER with BACKSPACE with I], [FUNCTION with 0] to enter KeyWeb. If you're presented with the "Address?" prompt, switch to another task, any task, and then return to KeyWeb, and you will now be presented with a blank Braille display. I'm suggesting you do this to avoid you having to type in your HTML file path at the Address Bar. If you are presented with Web page upon entering KeyWeb, there's no need to switch tasks. The Internet Options Menu, which is the easiest way to open the HTML file, is accessible when you are on a Web page or have a blank Braille display, but not at the Address Bar. 9) Press [ENTER with M], [CONTROL with 2] to enter the Internet Options Menu, then O to select the "Open HTML File" option. 10) You'll be prompted for the "File Name?", so press BACKSPACE once to change the directory, or, if you are also unsure of the drive you are being offered, press BACKSPACE twice. Select the location of your Stored block, and remember to use a slash before each layer of a directory when typing in a directory, and if you're using a BT, use Computer BRAILLE. Alternatively, you can browse through directories as you would through folders at the "Directory Name?" prompt, or switch to Folder List View with [SPACE with T], [CONTROL with T], and proceed from there as you would when typing in or browsing folders. When you are at the "File Name?" prompt, the first view you are presented with when you press SPACE to browse is the list of HTML files, which is what you want, so just find your file and press ENTER to select it. 11) It will open, and you will be able to read the e-mail as an HTML file. As it stands now, this work-around must be used because KeyMail cannot directly open KeyWeb to read the HTML file, and you will have to repeat the process on each HTML e-mail you receive. HTH. Maria > ----- Original Message ----- >From: Lisa Ehlers <[EMAIL PROTECTED] >To: [email protected] >Date: Tue, 29 Jun 2004 15:52:41 +1000 >Subject: [Braillenote] html codes in emails >Hello Listers, >I'm sorry I know I have asked about this before but I do not remember the >answer. >Okay I'm getting emails from people I know who I would like to correspond with >but the problem is reading their messages. They are full of html codes or >something. Sometimes all the coding stuff shows up at the top of the message >and once I get through that maze reading the message is like regular text. >Sometimes though the coding stuff appears in the message like there's a line >of text a line of codes a line of text. It's very annoying and makes me not >want to correspond with people who have this stuff in their emails. I o it >isn't the people's fault but is there something helpful I can do to be able to >read their messages better or tell them to send their emails in some different >format? >Thanks for your help and your time. >Lisa >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote
