I received my Brewtus III last week and have been pleased with the performance of the machine but have had some concern that the PID is not calibrated optimally. I have asked Whole Latte Love for assistance but they must be too swamped to respond. After searching the web for days I came across the following article that was written about an Izzo Alex Duetto that uses the same PID as the Brewtus. The article explains how to program the PID and has proven to be quite helpful.
The link is - http://coffeetime.wikidot.com/izzo-alex-duetto-pid-settings Before adjusting any setting I would suggest that you note the default setting that are in the unit so that you can always find your way back home if your tinkering does not yield the results that you desire. Since making a few adjustments my Brewtus seems to remain a bit more stable and take less time to stabilize. If you are daring please post your results and suggested settings. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
