Rob, You need an adapter that goes 1/4 British pipe tapered (the boiler tee) and goes 3/8 pipe thread (SS Hose), but your SS hose might also be British thread - depending on where you got it from. Mc Master Carr has a good selection. I use the local Swagelok supplier in Denver, too. They are pricey, but the quality of their products is superior. - Dennis
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Orianm42 Sent: Wednesday, October 28, 2009 6:32 PM To: Brewtus Subject: Metric Hose Fittings I'm in the process of converting my B II vibration pump to a B II rotary pump. I've got everything in place except for one fitting. I need an adapter that converts something that looks like a 3/8 to a 1/4 male (metric version). The fitting connects the output of S.S. hose from the pump to the input tee at the bottom of the boilers. I've tried the regular stores and a plumbing supply house to no avail. They don't sell metric. I've purchased the standard 3/8 to 1/4 male and it almost fits but leaks. Does anyone have any ideas? thanks rob --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
