Recently I've been getting a fair bit of water coming out the side/outside of my PF. I have not changed my coffee, methods, etc. I suspect either I need to do some intense cleaning, or maybe my PF is worn or something and not getting a proper seal? To illustrate what I'm talking about, see the annotated photo:
http://skitch.com/chrisrbailey/d7axc/bii-leak Those red arrows are pointing to the water that's leaking out the side. I've got the PF in there tight, so I don't think that's the issue (and again, I haven't changed my methods, and this is a new thing that's happening). The leak has gotten progressively worse. Initially it was just a few drops of water, but in this photo it's quite extreme where it's a full on stream. What would folks suggest? I've done the usual cleaning with the cleaning powder and backflushing, and I've scrubbed around in the area where the PF locks in (although I still seem some dirt/coffee sort of ground on there - I need to figure out how to get in there with a tool and maybe cleaner (recommendations?) so I can get that truly clean). So, before I got into intense cleaning mode, figured I'd post and see if anyone else has experienced this and what you did to solve it. Thanks. -- Chris Bailey [email protected] @chrisrbailey -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
