I work in the service dept of a coffee roaster. I would source parts through your original machine supplier as they probably source direct from expobar australia. Graeme Graeme Burton
-----Original Message----- From: "Jason > Studio Commercial" <[email protected]> Sender: [email protected] Date: Tue, 18 Jan 2011 12:06:13 To: <[email protected]> Reply-To: [email protected] Subject: Re: Modded Expobar Brewtus Fantastic work Graeme! Really enjoyed reading about your machine. I've had a Minore II for a few years and the only mods I've made is to replace the power switch, cool touch steam wand and a naked pf etc. I've been interested in putting in a PID controller and eventually plumbing in a rotary pump. The WLL upgrade kit has a 110volt only PID in it I think (is that still the case Todd?) I'm in Australia too (Sydney) so it won't work. Where did you get your parts from? Cheers, Jason. On 18/01/2011, at 3:07 AM, GRB wrote: > Thanks for your kind words guys. > > I wrote a blog entry which gives a bit more description of the > modifications. > http://blog.fivesensescoffee.com.au/2011/01/17/modding-an-expobar-for-increased-functionality-and-bling/ > > Graeme > > On Jan 17, 6:30 am, Ken <[email protected]> wrote: >> You need to take the Expobar plate off and replace it with your name! >> That is over the top! Especially the blue blind LED's! :) >> >> Nice job!! >> >> Ken >> >> On Jan 15, 4:12 am, GRB <[email protected]> wrote: >> >>> By way of introduction, I am a lapsed member of this group. >> >>> I read the postings a lot about 5 years ago when I was researching, >>> purchasing and then owning an Expobar Barista Minore as the Brewtus is >>> known in Australia. I have just completed an upgrade of my machine >>> and the pictures are here. >>> http://www.flickr.com/photos/fivesensescoffee/sets/72157625679070363/ >> >>> I offer many thanks to the members for their information and this >>> group! Graeme > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
