That sounds like a good possibility. Is replacing the heating element a major task and is there a good place for Brewtus parts?
Mark On Mar 15, 12:45 pm, Benjamin McCafferty <[email protected]> wrote: > Could your heating element be dying, i.e. not able to keep up? That seems > like way too much drop to me. > b > On Mar 15, 2011, at 11:46 AM, Mark wrote: > > > > > My three year old Brewtus II's steam pressure seems to be dropping > > rather rapidly lately. The pressure gauge shows 1.4 bars max and when > > I froth approx 12 oz of milk, it drops to around .3 bars and I just > > have enough steam pressue to finish. I've tried getting the boiler to > > kick in just before I start, but it doens't seem to help. I'm using a > > two-hole nozzle on the wand. Any thoughts on what might be the > > problem? > > > Thanks for your help. > > > Mark > > > -- > > You received this message because you are subscribed to the Google Groups > > "Brewtus" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group > > athttp://groups.google.com/group/brewtus?hl=en.- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
