Check your water tank switch. If it is sticky or has a bad contact (burnt / arcing) , any bouncing could cause issues with supply to the machine and in addition your house wiring.
I would also look at getting an insulation test done, if you do not have some earth leakage installed in your house. AM On Apr 8, 8:17 am, "[email protected]" <[email protected]> wrote: > Hello Everyone, > > For the past little while, I've been posting messages asking for help > with an issue I noticed with my vibe pump pulsing. Alas, no responses > to my questions. However, the plot now thickens.....the pulsing of the > PID seems to be causing my lights to flicker on one side of the > kitchen, as well as another room in our basement. I have also noticed > that when the boiler light is off, the pump (when running) will pulse > slightly with the PID. Once the boiler light turns on, the pulsing of > lights + pump stops. This flickering is very slight, but I'd be > interested in getting to the bottom of it. Has anyone else encountered > anything similar to this? > > Peter -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
