Why not silver solder the crack in the tube? Would require some information
about possible toxicity from the solder leaching into the steam and then
into the milk.
When I had a water pipe freeze and crack in my garage, because I had
accidently raised the motorized garage door and did not realize it, I was
able to solder the crack. So soldering a pipe on the Brewtus should be easy.
Allen
-----Original Message-----
From: Ira
Sent: Friday, September 02, 2011 11:50 AM
To: [email protected]
Subject: Re: Brewtus: Cracked Tubing
At 10:03 AM 9/2/2011, you wrote:
> Assembly tear down reveals a specific fitting, complete with rubber
> stopper, on the end. Whole Latte Love says ordering it may take
> months to receive.
Can the ends be removed from the current tubing and silver soldered
onto a new piece of tubing?
If you're going to throw it away, would you be willing to send it to me?
Ira
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
