Thanks for the offer Tod but I am in South Africa :-), I went past my local supplier and picked up a new one today so all sorted out.
All installed, had to reset the PID to default value's and then all was ok. Regards JohnB On Tue, Sep 25, 2012 at 2:41 PM, Todd Salzman <[email protected]> wrote: > Hello John,, > > It sounds like the PID controller is shot. > > It is a simple device, if it gets power it should work. > > If you are in the USA we can assist with getting another one. > > Let me know. > > Thanks > > Todd Salzman > Whole Latte Love > > > On Mon, Sep 24, 2012 at 4:05 PM, John Brinkman <[email protected]> > wrote: >> >> Lol, thanks Dennis >> >> Am using my Moca pot and frothing milk with the Brewtus at the moment >> so not totally without some caffeine! >> >> The display is showing 1.04 at the moment and seems to flash off for a >> moment about every three seconds. >> >> Am getting the feeling that the PID may be stuffed and will speak to >> the local suppliers tomorrow and see if they have any ideas. >> >> Have tried all the configurations of switching on/off with buttons >> pressed etc to rest the display and can get into the preset menu but >> cannot seem to get it working, anyway, will keep fingers crossed. >> >> JohnB >> >> On Mon, Sep 24, 2012 at 6:10 PM, Dennis Keating >> <[email protected]> wrote: >> > wish i could offer something, john >> > >> > -- >> > You received this message because you are subscribed to the Google >> > Groups >> > "Brewtus" group. >> > To post to this group, send email to [email protected]. >> > To unsubscribe from this group, send email to >> > [email protected]. >> > For more options, visit this group at >> > http://groups.google.com/group/brewtus?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/brewtus?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
