At 05:00 AM 10/20/2012, you wrote:
Our power switch feel off our brewtus last night. Is this an easily
replaceable part? Is there a description of this in the archives? I
did some searching and didn't find anything.
This looks about right:
http://www.mouser.com/ProductDetail/CK-Components/CN22J3RS215HQ8/?qs=%2fha2pyFaduhbVBjb0ZWXJxtb1LqT%252ba3FnOcsNY7qjDk%3d
or the same switch without the 0/1 markings
http://www.mouser.com/ProductDetail/CK-Components/CN202J3RS215Q7/?qs=sGAEpiMZZMtNT9UGfLL4eEXUF0YHaQ0Qi9sSuTw7QvQ%3d
I know the picture is green, but the part number indicates red with
the 0/1 on/off symbols as you can see from the data sheet. I'd
measure the hole to make sure it fits, but the bezel is the same size
and switches like that tend to be a standard size. It's also rated
at16 amps which is nice.
http://www.ck-components.com/15122/cn_9dec10.pdf/
These should also work, but no lamp:
http://www.allelectronics.com/make-a-store/item/RS-190/D.P.D.T.-ON-ON-ROCKER-SWITCH/1.html
It's easy to replace, just unplug the 4 wires pop out the old switch
by squeezing the wings on the back, pop in the new switch and put the
wires back on the same terminals on the new switch. But make sure
the connectors are all still good or you'll need to replace those too.
Unplug the machine and take off enough sheet metal to see the back of
the switch and you'll have a much better idea of the problem.
Ira
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
