If it did, maybe the steam boiler didn't need water, if it didn't then there is another problem.
Can you take the case off and see if a wire fell off when you moved it?
If you get the case off can you pull the level sense wire and see if the pump turns on?
Do you have a voltmeter?
Normally if the steam boiler needs water nothing will heat and the pump will constantly run.
Ira
At 11:27 AM 4/1/2013, you wrote:
Hot water came out, the bar needles went up some.--
On Monday, April 1, 2013 1:52:18 PM UTC-4, Ira wrote:
- At 10:22 AM 4/1/2013, you wrote:
- >I removed the reservoir and drained it, then replaced it and filled
- >it with water, then turned the machine on. The pump did not
- >activate, although the machine heated up and produced steam.
- What happens when you lift the lever?
You received this message because you are subscribed to the Google Groups "Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/brewtus?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
