Dude, you've let your water run out, you need to take tube out of the tank, force some water into the tube while starting the pump and then put the pipe in a feed.
I do it with a large glass high up as I can get it so that you have a small static head, you could connect the pipe to your tap by holding it in if you're close enough the pressure of the tap will push the water though. Your pump will go back to quiet, stop it, put back in the now full reservoir. Make sure the tube sits at the bottom and doesn't curl up. That's probs why it ran dry before the reservoir switch stopped the machine. On 16 December 2013 09:40, GambaMan <[email protected]> wrote: > My pump made a REALLY loud noise when I turned the machine on. Now no > water comes out at all... > Do I need to replace the pump or are there some other things I should do > first to diagnose the problem, > > Thank. > > The Gambaman. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/groups/opt_out. > -- Mike -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/groups/opt_out.
