I am not sure what you mean by the following statement. I don't think it is what you mean to say. (the steam boiler temp. will not read out on the PID)
"I have opened up the top and reset steam boiler and turned both back on and steam boiler power up and quickly went up to 201 on both boilers." So far it sounds like a pressure stat issue, heating element, high limit or control board. This video may help: https://www.youtube.com/watch?v=UIiLeRdVWAU On Wed, Oct 28, 2015 at 6:40 PM, ji <[email protected]> wrote: > Brewtus IV-R no steam when flipping switch. Have power to both boilers. > When both switches are on I can not get brew boiler to go past 55° > > But once I turn off steam boiler I can get brew boiler to quickly heat up > to 201° which is what pid is set at. > > I have opened up the top and reset steam boiler and turned both back on > and steam boiler power up and quickly went up to 201 on both boilers. But > ran some steam through and then the steam boiler when back on gauge to no > steam pressure and not putting any steam through. > > I'm needing help what to do or look for > I can still brew espresso like normal and at full pressure not problem > just not steam boiler working > > Justin > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
