We have some rebuilt machines that you may want to look at. We tore these machine down and descaled the boiler and all the copper tubing, rebuilt with new seals the group, steam valve and hot water valve. Any gauges or other parts were replaced as needed. The Brewtus machines that came with old AKO controller now have the new PID. We gave them a 1 year P&L warranty.
These machines operate like new. You can see them at: https://www.wholelattelove.com/outlet?cat=318 Here is a copy and paste from our site. Rebuilt Machine Overview Our rebuilt machines were entirely dismantled, cleaned and extensively rebuilt. The whole boiler assembly and all of the copper tubing was removed and thoroughly descaled. We then rebuilt the boiler, brew group, pump assembly and valves, cleaning, replacing and lubricating parts as necessary. Our entire process is described in detail below. Total Tear Down and Rebuild Process: - Boiler & Piping Assembly: We installed all NEW parts including a *heating element, pressurestat, safety valve, vacuum relief valve, high limit switch, and boiler insulation.* - Brew group: we then did a complete tear down, cleaning and lubrication of the brew group and installed all NEW *brewing, infusion and discharge valves along with their seals, the upper and lower infusion valve springs, the shower screen, and group gasket. They are just like new.* - Pump Assembly: the rebuilds all feature an all NEW *pump, OPV & air remover, and style fitting with heavy duty teflon tubing.* Testing Phase: - When the machines were reassembled, we adjusted the steam pressure to 1 bar; and, with the backflush disc in, we set the brew pressure to 10 bars. - Post-reassembly, we thoroughly tested the machine’s steaming, brewing and pre-infusion performance, and made sure the sound level it produced was no louder than on a new machine. Todd Salzman Whole Latte Love On Sat, Mar 24, 2018 at 6:22 PM, Dave B <[email protected]> wrote: > they usually die and are not economically repairable. > > I have several here. want one?213 800 3286 <(213)%20800-3286> > > On Mon, Mar 5, 2018 at 5:21 PM, James Otto <[email protected]> > wrote: > >> Looking to Purchase a Brewtus IV-p or -r , cant seem to find many used >> machines for sale, Upgrading from a Gaggia Classic. anyone here selling? >> or looking to upgrade in the near future? >> >> Thanks! >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
