There is a high probability that it could be a simple thing such as a safety fuse popping up on the boiler (you push it down to reset it and wait to see if it keeps popping up) which requires further tracing of the problem. I recommend that you call the service technicians at Wholr Latte Love and let them instruct you over the phone through a series of steps to diagnose the problem and allow them to recommend the best solution. Most likely, they will send you a part and a set of instructions for I installing it.
> On Dec 19, 2019, at 9:52 AM, bonner <[email protected]> wrote: > > > After all recent adjustments to pressure and the addition of tamping and > distribution improvements, my shots have been greatly improved. > Unfortunately, today, after a normal pull, I returned later for a second, > only to find the machine totally cold. The switch is still lit, but I have > not yet opened the case. > > My question is whether there are things easily checked before proceeding to > pulling out the boiler and/or coil. This machine is an office lever. > > Thanks for suggestions. > > Beeg > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/00ff01d5b67b%24ebbde120%24c339a360%24%40bellsouth.net. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/5FEB8348-7745-413D-9F79-CCAF8ABF84D0%40verizon.net.
