Problem solved. The E61 kit for ECM that I linked to earlier worked just fine. Finally a good coffee again :)
On Tue, Feb 4, 2020 at 7:42 AM David Bengtsson <[email protected]> wrote: > > Thank you. I have e-mailed the german dealer to see if they know if > the kit will work. They sell other parts for Expobar so I think they > have the knowledge. > > > On Mon, Feb 3, 2020 at 4:56 PM Eric Christoffersen <[email protected]> wrote: > > > > That kit is more complete and looks like a great price. The top and bottom > > pieces look like the correct plungers. The lobed thing in the middle looks > > different from the Cam brew lever shaft in my b2 - I don’t think mine has a > > spring? Might work? I’ve never replaced that middle piece, just the brew > > lever shaft seals. The plungers are slightly different for top and bottom > > and the kit you linked shows that. > > > > The shame is that the rubber disc turns into rock and cannot be replaced so > > you need new plungers. > > > > I don’t have my kits part number but here’s a great diagram from an > > Australian site: > > > > https://www.coffeeparts.com.au/vbm-home-spare-parts-1-group-head-e61-lever-operated > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Brewtus" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > To view this discussion on the web visit > > https://groups.google.com/d/msgid/brewtus/6927348f-7a79-4bb5-98e8-04dc3819695b%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM0ZN6AqztffVw8OTz1QAOEZ6nebiQkz2WWNM7n6JoL%3D6d2jGA%40mail.gmail.com.
