Joseph that looks amazing! Could I ask - how did you clean the copper boilers and get them so shiny? care to share a few notes on the process and tools needed? And how will you tackle re-insulating them?
On Sunday, March 22, 2020 at 7:53:24 PM UTC-4, Joseph Helminiak wrote: > > Received vs right now :) > -jjh > > On Friday, March 20, 2020 at 9:30:36 PM UTC-5, Eric Christoffersen wrote: >> >> That'll be the new thing. Shining up the inside of your espresso machine >> to a mirror polish. Like a tuba! >> >> On Friday, March 20, 2020 at 12:39:04 PM UTC-7, Joseph Helminiak wrote: >>> >>> So far clean inside and out :) >>> >>> On Monday, March 16, 2020 at 8:19:01 PM UTC-5, Joseph Helminiak wrote: >>>> >>>> Okay so my damaged in shipment has me tearing this thing ALL the way >>>> down. >>>> >>>> Since the machine is not complicated thinking about just a total >>>> do-over. >>>> >>>> 2 PID's (old red unit, and broken PSTAT- leaking water out the side) >>>> Auber PID $35 each plus sensors and SSR's >>>> >>>> Maybe just do all the wiring to the IV machine? I googled but have not >>>> found anyone that has done this. >>>> And I would really like to plumb it in, just make it way easier on me >>>> in the mornings >>>> >>> -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/dba6dbd8-09f6-4f19-aed2-0e2c1dd3f316o%40googlegroups.com.
