Hi everyone, A few weeks ago, I started having intermittent problems with the steam boiler not getting power. When it started, the machine powered on normally in the morning but at some point in the day, the steam boiler would lose power (no red light on the front, no steam pressure, etc.). Now, it doesn't get power at all at machine start-up. It's as though the switch is off to the steam boiler... the brew boiler starts heating up right away and no problems at all with it.
A potentially related issue is that I heard the pressure release value kick in a couple of times when the intermittent problems started. This makes me wonder if the pressurestat could be to blame (as I've replaced one of those already). I tried the steps in WWL electrical system test (https://www.youtube.com/watch?v=UIiLeRdVWAU). The pressurestat is getting power from the steam boiler switch and relaying it just fine to the brew boiler but I can't get power to the steam boiler. The high limit switch on the steam boiler had resistance and seemed OK when I tested it according to the video. I wasn't sure how to test the steam boiler switch as I didn't see a good wiring diagram for it. Bad switch, pressurestat, or something else? Thanks, Adam -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/201682d2-b3d9-4dbd-87dc-cf3047caf4f5n%40googlegroups.com.
