Hi Andrey, Perhaps you got the connectors on the pressurestat mixed up, or the high temperature switch might be open circuit (can check it with a multimeter)?
I rebuilt a Brewtus ii a little while ago and took a bunch of photos. You can probably use the photos as a reference to check everything is OK? https://coffeesnobs.com.au/forum/equipment/brewing-equipment-pointy-end-1500-3000/836201-expobar-minore-brewtus-ii-repair-rebuild Cheers, Aaron On Tue, Jan 18, 2022 at 9:16 AM 'Andrey Sychev' via Brewtus < [email protected]> wrote: > So I installed the new heating element, checked resistance and continuity > again (everything checked out) and turned the machine on. The pump kicked > as expected but it’s been sitting on .11 reading for the past hour and > doesn’t looks like it’s heating up. Any guesses what could be wrong? Did > switched the contacts on one of the heating elements? I connected > white/blue wire to one marked with blue paint contact- is that reversed? > > > > Sent from my iPhone > > On Jan 14, 2022, at 7:48 PM, Andrey Sychev <[email protected]> wrote: > > Thanks Kevin. I think I may have left the boiler sitting opened a bit too > long so some of the white stuff dried. WLL said it’s acrylic insulation > from inside the heating element that self destructed. I used chopsticks to > get some of that stuff up and flipped machine over to drain. Majority of > what’s in the photo seems dried up or baked and won’t scrape easily. > > I think I can get insulation installed pretty easily as long as I find a > source for original or replacement that isn’t significantly thicker. As > you can see all wire wraps turned fragile and fell off. > > Sent from my iPhone > > On Jan 14, 2022, at 5:34 PM, Eric Christoffersen <[email protected]> > wrote: > > I ended up wrapping mine with a piece of a wool sweater. > > On Friday, January 14, 2022 at 10:23:50 AM UTC-8 Andre wrote: > >> And another off topic question for the group- has anyone been able to >> replace the boilers fiberglass? insulation. Mine isn’t in the best shape >> especially after flipping machine over with citric acid everywhere. Thanks. >> >> -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/5c235652-768a-4074-8f62-05af5b090d87n%40googlegroups.com > <https://groups.google.com/d/msgid/brewtus/5c235652-768a-4074-8f62-05af5b090d87n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/7C86E020-CDD8-4BB2-96E1-3B999C8871E6%40aol.com > <https://groups.google.com/d/msgid/brewtus/7C86E020-CDD8-4BB2-96E1-3B999C8871E6%40aol.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/EE8CE974-2A61-4432-9E20-6D56EA913AF7%40aol.com > <https://groups.google.com/d/msgid/brewtus/EE8CE974-2A61-4432-9E20-6D56EA913AF7%40aol.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CANK1YTqJ%2Bod6Muk10KbpBvA2CE-3BiOLMdctx2ZNaoVheS%3DoJw%40mail.gmail.com.
